A local copy of OpenSSL from GitHub
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

81 lines
2.7 KiB

Refactor file writing - introduce template driven file writing apps/CA.pl and tools/c_rehash are built from template files. So far, this was done by Configure, which created its own problems as it forced everyone to reconfigure just because one of the template files had changed. Instead, have those files created as part of the normal build in apps/ and in tools/. Furthermore, this prepares for a future where Configure may produce entirely other build files than Makefile, and the latter can't be guaranteed to be the holder of all information for other scripts. Instead, configdata.pm (described below) becomes the center of configuration information. This introduces a few new things: %config a hash table to hold all kinds of configuration data that can be used by any other script. configdata.pm a perl module that Configure writes. It currently holds the hash tables %config and %target. util/dofile.pl a script that takes a template on STDIN and outputs the result after applying configuration data on it. It's supposed to be called like this: perl -I$(TOP) -Mconfigdata < template > result or perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result Note: util/dofile.pl requires Text::Template. As part of this changed, remove a number of variables that are really just copies of entries in %target, and use %target directly. The exceptions are $target{cflags} and $target{lflags}, they do get copied to $cflags and $lflags. The reason for this is that those variable potentially go through a lot of changes and would rather deserve a place in %config. That, however, is for another commit. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
7 years ago
Refactor file writing - introduce template driven file writing apps/CA.pl and tools/c_rehash are built from template files. So far, this was done by Configure, which created its own problems as it forced everyone to reconfigure just because one of the template files had changed. Instead, have those files created as part of the normal build in apps/ and in tools/. Furthermore, this prepares for a future where Configure may produce entirely other build files than Makefile, and the latter can't be guaranteed to be the holder of all information for other scripts. Instead, configdata.pm (described below) becomes the center of configuration information. This introduces a few new things: %config a hash table to hold all kinds of configuration data that can be used by any other script. configdata.pm a perl module that Configure writes. It currently holds the hash tables %config and %target. util/dofile.pl a script that takes a template on STDIN and outputs the result after applying configuration data on it. It's supposed to be called like this: perl -I$(TOP) -Mconfigdata < template > result or perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result Note: util/dofile.pl requires Text::Template. As part of this changed, remove a number of variables that are really just copies of entries in %target, and use %target directly. The exceptions are $target{cflags} and $target{lflags}, they do get copied to $cflags and $lflags. The reason for this is that those variable potentially go through a lot of changes and would rather deserve a place in %config. That, however, is for another commit. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
7 years ago
Refactor file writing - introduce template driven file writing apps/CA.pl and tools/c_rehash are built from template files. So far, this was done by Configure, which created its own problems as it forced everyone to reconfigure just because one of the template files had changed. Instead, have those files created as part of the normal build in apps/ and in tools/. Furthermore, this prepares for a future where Configure may produce entirely other build files than Makefile, and the latter can't be guaranteed to be the holder of all information for other scripts. Instead, configdata.pm (described below) becomes the center of configuration information. This introduces a few new things: %config a hash table to hold all kinds of configuration data that can be used by any other script. configdata.pm a perl module that Configure writes. It currently holds the hash tables %config and %target. util/dofile.pl a script that takes a template on STDIN and outputs the result after applying configuration data on it. It's supposed to be called like this: perl -I$(TOP) -Mconfigdata < template > result or perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result Note: util/dofile.pl requires Text::Template. As part of this changed, remove a number of variables that are really just copies of entries in %target, and use %target directly. The exceptions are $target{cflags} and $target{lflags}, they do get copied to $cflags and $lflags. The reason for this is that those variable potentially go through a lot of changes and would rather deserve a place in %config. That, however, is for another commit. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
7 years ago
Refactor file writing - introduce template driven file writing apps/CA.pl and tools/c_rehash are built from template files. So far, this was done by Configure, which created its own problems as it forced everyone to reconfigure just because one of the template files had changed. Instead, have those files created as part of the normal build in apps/ and in tools/. Furthermore, this prepares for a future where Configure may produce entirely other build files than Makefile, and the latter can't be guaranteed to be the holder of all information for other scripts. Instead, configdata.pm (described below) becomes the center of configuration information. This introduces a few new things: %config a hash table to hold all kinds of configuration data that can be used by any other script. configdata.pm a perl module that Configure writes. It currently holds the hash tables %config and %target. util/dofile.pl a script that takes a template on STDIN and outputs the result after applying configuration data on it. It's supposed to be called like this: perl -I$(TOP) -Mconfigdata < template > result or perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result Note: util/dofile.pl requires Text::Template. As part of this changed, remove a number of variables that are really just copies of entries in %target, and use %target directly. The exceptions are $target{cflags} and $target{lflags}, they do get copied to $cflags and $lflags. The reason for this is that those variable potentially go through a lot of changes and would rather deserve a place in %config. That, however, is for another commit. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
7 years ago
Refactor file writing - introduce template driven file writing apps/CA.pl and tools/c_rehash are built from template files. So far, this was done by Configure, which created its own problems as it forced everyone to reconfigure just because one of the template files had changed. Instead, have those files created as part of the normal build in apps/ and in tools/. Furthermore, this prepares for a future where Configure may produce entirely other build files than Makefile, and the latter can't be guaranteed to be the holder of all information for other scripts. Instead, configdata.pm (described below) becomes the center of configuration information. This introduces a few new things: %config a hash table to hold all kinds of configuration data that can be used by any other script. configdata.pm a perl module that Configure writes. It currently holds the hash tables %config and %target. util/dofile.pl a script that takes a template on STDIN and outputs the result after applying configuration data on it. It's supposed to be called like this: perl -I$(TOP) -Mconfigdata < template > result or perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result Note: util/dofile.pl requires Text::Template. As part of this changed, remove a number of variables that are really just copies of entries in %target, and use %target directly. The exceptions are $target{cflags} and $target{lflags}, they do get copied to $cflags and $lflags. The reason for this is that those variable potentially go through a lot of changes and would rather deserve a place in %config. That, however, is for another commit. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
7 years ago
Refactor file writing - introduce template driven file writing apps/CA.pl and tools/c_rehash are built from template files. So far, this was done by Configure, which created its own problems as it forced everyone to reconfigure just because one of the template files had changed. Instead, have those files created as part of the normal build in apps/ and in tools/. Furthermore, this prepares for a future where Configure may produce entirely other build files than Makefile, and the latter can't be guaranteed to be the holder of all information for other scripts. Instead, configdata.pm (described below) becomes the center of configuration information. This introduces a few new things: %config a hash table to hold all kinds of configuration data that can be used by any other script. configdata.pm a perl module that Configure writes. It currently holds the hash tables %config and %target. util/dofile.pl a script that takes a template on STDIN and outputs the result after applying configuration data on it. It's supposed to be called like this: perl -I$(TOP) -Mconfigdata < template > result or perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result Note: util/dofile.pl requires Text::Template. As part of this changed, remove a number of variables that are really just copies of entries in %target, and use %target directly. The exceptions are $target{cflags} and $target{lflags}, they do get copied to $cflags and $lflags. The reason for this is that those variable potentially go through a lot of changes and would rather deserve a place in %config. That, however, is for another commit. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
7 years ago
Refactor file writing - introduce template driven file writing apps/CA.pl and tools/c_rehash are built from template files. So far, this was done by Configure, which created its own problems as it forced everyone to reconfigure just because one of the template files had changed. Instead, have those files created as part of the normal build in apps/ and in tools/. Furthermore, this prepares for a future where Configure may produce entirely other build files than Makefile, and the latter can't be guaranteed to be the holder of all information for other scripts. Instead, configdata.pm (described below) becomes the center of configuration information. This introduces a few new things: %config a hash table to hold all kinds of configuration data that can be used by any other script. configdata.pm a perl module that Configure writes. It currently holds the hash tables %config and %target. util/dofile.pl a script that takes a template on STDIN and outputs the result after applying configuration data on it. It's supposed to be called like this: perl -I$(TOP) -Mconfigdata < template > result or perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result Note: util/dofile.pl requires Text::Template. As part of this changed, remove a number of variables that are really just copies of entries in %target, and use %target directly. The exceptions are $target{cflags} and $target{lflags}, they do get copied to $cflags and $lflags. The reason for this is that those variable potentially go through a lot of changes and would rather deserve a place in %config. That, however, is for another commit. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
7 years ago
Refactor file writing - introduce template driven file writing apps/CA.pl and tools/c_rehash are built from template files. So far, this was done by Configure, which created its own problems as it forced everyone to reconfigure just because one of the template files had changed. Instead, have those files created as part of the normal build in apps/ and in tools/. Furthermore, this prepares for a future where Configure may produce entirely other build files than Makefile, and the latter can't be guaranteed to be the holder of all information for other scripts. Instead, configdata.pm (described below) becomes the center of configuration information. This introduces a few new things: %config a hash table to hold all kinds of configuration data that can be used by any other script. configdata.pm a perl module that Configure writes. It currently holds the hash tables %config and %target. util/dofile.pl a script that takes a template on STDIN and outputs the result after applying configuration data on it. It's supposed to be called like this: perl -I$(TOP) -Mconfigdata < template > result or perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result Note: util/dofile.pl requires Text::Template. As part of this changed, remove a number of variables that are really just copies of entries in %target, and use %target directly. The exceptions are $target{cflags} and $target{lflags}, they do get copied to $cflags and $lflags. The reason for this is that those variable potentially go through a lot of changes and would rather deserve a place in %config. That, however, is for another commit. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
7 years ago
  1. #! /usr/bin/env perl
  2. # Copyright 2016-2018 The OpenSSL Project Authors. All Rights Reserved.
  3. #
  4. # Licensed under the Apache License 2.0 (the "License"). You may not use
  5. # this file except in compliance with the License. You can obtain a copy
  6. # in the file LICENSE in the source distribution or at
  7. # https://www.openssl.org/source/license.html
  8. # Reads one or more template files and runs it through Text::Template
  9. #
  10. # It is assumed that this scripts is called with -Mconfigdata, a module
  11. # that holds configuration data in %config
  12. use strict;
  13. use warnings;
  14. use FindBin;
  15. use lib "$FindBin::Bin/perl";
  16. use OpenSSL::fallback "$FindBin::Bin/../external/perl/MODULES.txt";
  17. use Getopt::Std;
  18. use OpenSSL::Template;
  19. # We actually expect to get the following hash tables from configdata:
  20. #
  21. # %config
  22. # %target
  23. # %withargs
  24. # %unified_info
  25. #
  26. # We just do a minimal test to see that we got what we expected.
  27. # $config{target} must exist as an absolute minimum.
  28. die "You must run this script with -Mconfigdata\n"
  29. if !exists($config{target});
  30. # Check options ######################################################
  31. my %opts = ();
  32. # -o ORIGINATOR
  33. # declares ORIGINATOR as the originating script.
  34. getopt('o', \%opts);
  35. my @autowarntext = ("WARNING: do not edit!",
  36. "Generated"
  37. . (defined($opts{o}) ? " by ".$opts{o} : "")
  38. . (scalar(@ARGV) > 0 ? " from ".join(", ",@ARGV) : ""));
  39. # Template setup #####################################################
  40. my @template_settings =
  41. @ARGV
  42. ? map { { TYPE => 'FILE', SOURCE => $_, FILENAME => $_ } } @ARGV
  43. : ( { TYPE => 'FILEHANDLE', SOURCE => \*STDIN, FILENAME => '<stdin>' } );
  44. # Engage! ############################################################
  45. my $prepend = <<"_____";
  46. use File::Spec::Functions;
  47. _____
  48. $prepend .= <<"_____" if defined $target{perl_platform};
  49. use lib "$FindBin::Bin/../Configurations";
  50. use lib '$config{builddir}';
  51. use platform;
  52. _____
  53. foreach (@template_settings) {
  54. my $template = OpenSSL::Template->new(%$_);
  55. $template->fill_in(%$_,
  56. OUTPUT => \*STDOUT,
  57. HASH => { config => \%config,
  58. target => \%target,
  59. disabled => \%disabled,
  60. withargs => \%withargs,
  61. unified_info => \%unified_info,
  62. autowarntext => \@autowarntext },
  63. PREPEND => $prepend,
  64. # To ensure that global variables and functions
  65. # defined in one template stick around for the
  66. # next, making them combinable
  67. PACKAGE => 'OpenSSL::safe');
  68. }