Import of old SSLeay release: SSLeay 0.9.0b

COPYRIGHT

@@ -62,3 +62,4 @@ The reason behind this being stated in this direct manner is past
 experience in code simply being copied and the attribution removed
 from it and then being distributed as part of other packages. This
 implementation was a non-trivial and unpaid effort.
+

Configure

@@ -21,18 +21,22 @@
 #		This is used on the DEC Alpha where long is 8 bytes
 #		and int is 4
 # BN_LLONG	use the type 'long long' in crypto/bn/bn.h
-# MD2_CHAR	use 'char' instead of 'int' for MD2_INT in crypto/md/md2.h
-# MD2_LONG	use 'long' instead of 'int' for MD2_INT in crypto/md/md2.h
+# MD2_CHAR	use 'char' instead of 'int' for MD2_INT in crypto/md2/md2.h
+# MD2_LONG	use 'long' instead of 'int' for MD2_INT in crypto/md2/md2.h
 # IDEA_SHORT	use 'short' instead of 'int' for IDEA_INT in crypto/idea/idea.h
 # IDEA_LONG	use 'long' instead of 'int' for IDEA_INT in crypto/idea/idea.h
 # RC2_SHORT	use 'short' instead of 'int' for RC2_INT in crypto/rc2/rc2.h
 # RC2_LONG	use 'long' instead of 'int' for RC2_INT in crypto/rc2/rc2.h
 # RC4_CHAR	use 'char' instead of 'int' for RC4_INT in crypto/rc4/rc4.h
 # RC4_LONG	use 'long' instead of 'int' for RC4_INT in crypto/rc4/rc4.h
-# RC4_INDEX	define RC4_INDEX in crypto/rc4/rc4_enc.c.  This turns on
+# RC4_INDEX	define RC4_INDEX in crypto/rc4/rc4_locl.h.  This turns on
 #		array lookups instead of pointer use.
 # BF_PTR	use 'pointer arithmatic' for Blowfish (unsafe on Alpha).
 # BF_PTR2	use a pentium/intel specific version.
+# MD5_ASM	use some extra md5 assember,
+# SHA1_ASM	use some extra sha1 assember, must define L_ENDIAN for x86
+# RMD160_ASM	use some extra ripemd160 assember,
+# BN_ASM	use some extra bn assember,
 
 $x86_gcc_des="DES_PTR DES_RISC1 DES_UNROLL";
 
@@ -51,7 +55,13 @@ $tlib="-lnsl -lsocket";
 $bits1="THIRTY_TWO_BIT ";
 $bits2="SIXTY_FOUR_BIT ";
 
-# -DB_ENDIAN slows things down on a sparc
+$x86_sol_asm="asm/bn86-sol.o:asm/dx86-sol.o asm/yx86-sol.o:asm/bx86-sol.o:asm/mx86-sol.o:asm/sx86-sol.o:asm/cx86-sol.o:asm/rx86-sol.o:asm/rm86-sol.o:asm/r586-sol.o";
+$x86_elf_asm="asm/bn86-elf.o:asm/dx86-elf.o asm/yx86-elf.o:asm/bx86-elf.o:asm/mx86-elf.o:asm/sx86-elf.o:asm/cx86-elf.o:asm/rx86-elf.o:asm/rm86-elf.o:asm/r586-elf.o";
+$x86_out_asm="asm/bn86-out.o:asm/dx86-out.o asm/yx86-out.o:asm/bx86-out.o:asm/mx86-out.o:asm/sx86-out.o:asm/cx86-out.o:asm/rx86-out.o:asm/rm86-out.o:asm/r586-out.o";
+$x86_bsdi_asm="asm/bn86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:asm/bx86bsdi.o:asm/mx86bsdi.o:asm/sx86bsdi.o:asm/cx86bsdi.o:asm/rx86bsdi.o:asm/rm86bsdi.o:asm/r586bsdi.o";
+
+# -DB_ENDIAN slows things down on a sparc for md5, but helps sha1.
+# So the md5_locl.h file has an undef B_ENDIAN if sun is defined
 
 #config-string	CC : CFLAGS : LDFLAGS : special header file mods:bn_asm \
 # des_asm:bf_asm
@@ -63,18 +73,17 @@ $bits2="SIXTY_FOUR_BIT ";
 
 # A few of my development configs
 "purify",	"purify gcc:-g -DPURIFY -Wall:-lsocket -lnsl::::",
-"debug",	"gcc:-DREF_CHECK -DCRYPTO_MDEBUG -g -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:::::",
+"debug",	"gcc:-DREF_CHECK -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror:::::",
 "dist",		"cc:-O -DNOPROTO::::",
 
 # Basic configs that should work on any box
 "gcc",		"gcc:-O3::BN_LLONG:::",
 "cc",		"cc:-O -DNOPROTO -DNOCONST:::::",
 
+
 # My solaris setups
-"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN:\
-	-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-sol.o:asm/dx86-sol.o asm/cx86-sol.o:asm/bx86-sol.o",
-"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall:\
-	-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
+"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DBN_ASM:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm:",
+"solaris-sparc-gcc","gcc:-O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::",
 # DO NOT use /xO[34] on sparc with SC3.0. 
 # It is broken, and will not pass the tests
 "solaris-sparc-cc","cc:-fast -O -Xa -DB_ENDIAN:\
@@ -116,30 +125,44 @@ $bits2="SIXTY_FOUR_BIT ";
 "alpha400-cc", "cc:-arch host -tune host -fast -std -O4 -inline speed::SIXTY_FOUR_BIT_LONG:asm/alpha.o::",
 
 # The intel boxes :-), It would be worth seeing if bsdi-gcc can use the
-# x86-lnx.o file file since it is hand tweaked assembler.
-"linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized::BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnx.o:asm/dx86-elf.o asm/cx86-elf.o:asm/bx86-elf.o",
-"debug-linux-elf","gcc:-DREF_CHECK -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall:-lefence:BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnx.o:asm/dx86-elf.o asm/cx86-elf.o:asm/bx86-elf.o",
-"linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnxa.o:asm/dx86-out.o asm/cx86-out.o:asm/bx86-out.o",
-"NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
-"NetBSD-x86",	"gcc:-DTERMIOS -D_ANSI_SOURCE -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnxa.o:asm/dx86-out.o asm/cx86-out.o:asm/bx86-out.o",
-"FreeBSD",   "gcc:-DTERMIOS -D_ANSI_SOURCE -fomit-frame-pointer -O3 -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnxa.o:asm/dx86-out.o asm/cx86-out.o:asm/bx86-out.o",
-#"bsdi-gcc",	"shlicc2:-O3 -ffast-math-m486::RSA_LLONG $x86_gcc_des $x86_gcc_opts:::",
-#"bsdi-gcc",     "gcc:-O3 -ffast-math -DPERL5 -m486::RSA_LLONG $x86_gc_des $x86_gcc_opts:asm/x86-bsdi.o:asm/dx86bsdi.o asm/cx86bsdi.o:asm/bx86bsdi.o",
-"bsdi-gcc",     "gcc:-O3 -ffast-math -DPERL5 -m486::RSA_LLONG $x86_gc_des $x86_gcc_opts:::",
-"nextstep",	"cc:-O3 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:::",
+# bn86-elf.o file file since it is hand tweaked assembler.
+"linux-elf",	"gcc:-DL_ENDIAN -DTERMIO -DBN_ASM -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"debug-linux-elf","gcc:-DREF_CHECK -DBN_ASM -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall:-lefence:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
+"linux-aout",	"gcc:-DL_ENDIAN -DTERMIO -DBN_ASM -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
+"NetBSD-sparc",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
+"NetBSD-m86",	"gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::",
+"NetBSD-x86",	"gcc:-DTERMIOS -DBN_ASM -D_ANSI_SOURCE -O3 -fomit-frame-pointer -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:",
+"FreeBSD",   "gcc:-DTERMIOS -DBN_ASM -DL_ENDIAN -D_ANSI_SOURCE -fomit-frame-pointer -O3 -m486 -Wall::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm",
+#"bsdi-gcc",     "gcc:-O3 -ffast-math -DBN_ASM -DL_ENDIAN -DPERL5 -m486::RSA_LLONG $x86_gc_des $x86_gcc_opts:$x86_bsdi_asm",
+"nextstep",	"cc:-O3 -Wall -DBN_ASM::BN_LLONG $x86_gcc_des $x86_gcc_opts:::",
+# NCR MP-RAS UNIX ver 02.03.01
+"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw:-lsocket -lnsl:$x86_gcc_des $x86_gcc_opts:::",
 
 # UnixWare 2.0
-"unixware-2.0","cc:-O:-lsocket -lnsl:$x86_gcc_des $x86_gcc_opts:::",
-"unixware-2.0-pentium","cc:-O -Kpentium -Kthread:-lsocket -lnsl:MD2_CHAR RC4_INDEX $x86_des_des::",
+"unixware-2.0","cc:-O -DFILIO_H:-lsocket -lnsl:$x86_gcc_des $x86_gcc_opts:::",
+"unixware-2.0-pentium","cc:-O -DFILIO_H -Kpentium -Kthread:-lsocket -lnsl:MD2_CHAR RC4_INDEX $x86_des_des::",
 
 # IBM's AIX.
 "aix-cc",   "cc:-O -DAIX -DB_ENDIAN::BN_LLONG RC4_CHAR:::",
 "aix-gcc",  "gcc:-O2 -DAIX -DB_ENDIAN::BN_LLONG RC4_CHAR:::",
 
+#
+# Cray T90 (SDSC)
+# It's Big-endian, but the algorithms work properly when B_ENDIAN is NOT
+# defined.  The T90 ints and longs are 8 bytes long, and apparently the
+# B_ENDIAN code assumes 4 byte ints.  Fortunately, the non-B_ENDIAN and
+# non L_ENDIAN code aligns the bytes in each word correctly.
+#
+# The BIT_FIELD_LIMITS define is to avoid two fatal compiler errors:
+#'Taking the address of a bit field is not allowed. '
+#'An expression with bit field exists as the operand of "sizeof" '
+# (written by Wayne Schroeder <schroede@SDSC.EDU>)
+"cray-t90-cc", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::SIXTY_FOUR_BIT_LONG DES_INT:::",
+
 # DGUX, 88100.
 "dgux-R3-gcc",	"gcc:-O3 -fomit-frame-pointer::RC4_INDEX DES_UNROLL:::",
 "dgux-R4-gcc",	"gcc:-O3 -fomit-frame-pointer:-lnsl -lsocket:RC4_INDEX:RC4_INDEX DES_UNROLL:::",
-"dgux-R4-x86-gcc",	"gcc:-O3 -fomit-frame-pointer -DL_ENDIAN:-lnsl -lsocket:BN_LLONG $x86_gcc_des $x86_gcc_opts:asm/x86-lnx.o:asm/dx86-elf.o asm/cx86-elf.o:asm/bx86-elf.o",
+"dgux-R4-x86-gcc",	"gcc:-O3 -DBN_ASM -fomit-frame-pointer -DL_ENDIAN:-lnsl -lsocket:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm",
 
 # SCO 5
 "sco5-cc",  "cc:-O:-lsocket:$x86_gcc_des $x86_gcc_opts:::", # des options?
@@ -167,15 +190,21 @@ $Makefile="Makefile.ssl";
 $des_locl="crypto/des/des_locl.h";
 $des	="crypto/des/des.h";
 $bn	="crypto/bn/bn.h";
-$md2	="crypto/md/md2.h";
+$md2	="crypto/md2/md2.h";
 $rc4	="crypto/rc4/rc4.h";
-$rc4_enc="crypto/rc4/rc4_enc.c";
+$rc4_locl="crypto/rc4/rc4_locl.h";
 $idea	="crypto/idea/idea.h";
 $rc2	="crypto/rc2/rc2.h";
 $bf	="crypto/bf/bf_locl.h";
 $bn_mulw="bn_mulw.o";
 $des_enc="des_enc.o fcrypt_b.o";
 $bf_enc	="bf_enc.o";
+$cast_enc="c_enc.o";
+$rc4_enc="rc4_enc.o";
+$rc5_enc="rc5_enc.o";
+$md5_obj="";
+$sha1_obj="";
+$rmd160_obj="";
 
 if ($#ARGV < 0)
 	{
@@ -219,14 +248,33 @@ if (!defined($table{$target}))
 	exit(1);
 	}
 
-($cc,$cflags,$lflags,$bn_ops,$bn_obj,$des_obj,$bf_obj)=
+($cc,$cflags,$lflags,$bn_ops,$bn_obj,$des_obj,$bf_obj,$md5_obj,$sha1_obj,
+	$cast_obj,$rc4_obj,$rmd160_obj,$rc5_obj)=
 	split(/\s*:\s*/,$table{$target});
 $cflags="$flags$cflags" if ($flags ne "");
 $lflags="$libs$lflags"if ($libs ne "");
 
-$bn_obj=$bn_mulw unless ($bn_obj =~ /\.o$/);
-$des_obj=$des_enc unless ($des_obj =~ /\.o$/);
-$bf_obj=$bf_enc unless ($bf_obj =~ /\.o$/);
+$bn_obj=$bn_mulw	unless ($bn_obj =~ /\.o$/);
+$des_obj=$des_enc	unless ($des_obj =~ /\.o$/);
+$bf_obj=$bf_enc		unless ($bf_obj =~ /\.o$/);
+$cast_obj=$cast_enc	unless ($cast_obj =~ /\.o$/);
+$rc4_obj=$rc4_enc	unless ($rc4_obj =~ /\.o$/);
+$rc5_obj=$rc5_enc	unless ($rc5_obj =~ /\.o$/);
+if ($sha1_obj =~ /\.o$/)
+	{
+#	$sha1_obj=$sha1_enc;
+	$cflags.=" -DSHA1_ASM";
+	}
+if ($md5_obj =~ /\.o$/)
+	{
+#	$md5_obj=$md5_enc;
+	$cflags.=" -DMD5_ASM";
+	}
+if ($rmd160_obj =~ /\.o$/)
+	{
+#	$rmd160_obj=$rmd160_enc;
+	$cflags.=" -DRMD160_ASM";
+	}
 
 $n=&file_new($Makefile);
 open(IN,"<".$Makefile) || die "unable to read $Makefile:$!\n";
@@ -240,18 +288,30 @@ while (<IN>)
 	s/^BN_MULW=.*$/BN_MULW= $bn_obj/;
 	s/^DES_ENC=.*$/DES_ENC= $des_obj/;
 	s/^BF_ENC=.*$/BF_ENC= $bf_obj/;
+	s/^CAST_ENC=.*$/CAST_ENC= $cast_obj/;
+	s/^RC4_ENC=.*$/RC4_ENC= $rc4_obj/;
+	s/^RC5_ENC=.*$/RC5_ENC= $rc5_obj/;
+	s/^MD5_ASM_OBJ=.*$/MD5_ASM_OBJ= $md5_obj/;
+	s/^SHA1_ASM_OBJ=.*$/SHA1_ASM_OBJ= $sha1_obj/;
+	s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $rmd160_obj/;
 	print OUT $_."\n";
 	}
 close(IN);
 close(OUT);
 &Rename($Makefile,&file_old($Makefile));
 &Rename($n,$Makefile);
-print "CC     =$cc\n";
-print "CFLAG  =$cflags\n";
-print "EX_LIBS=$lflags\n";
-print "BN_MULW=$bn_obj\n";
-print "DES_ENC=$des_obj\n";
-print "BF_ENC =$bf_obj\n";
+print "CC            =$cc\n";
+print "CFLAG         =$cflags\n";
+print "EX_LIBS       =$lflags\n";
+print "BN_MULW       =$bn_obj\n";
+print "DES_ENC       =$des_obj\n";
+print "BF_ENC        =$bf_obj\n";
+print "CAST_ENC      =$cast_obj\n";
+print "RC4_ENC       =$rc4_obj\n";
+print "RC5_ENC       =$rc5_obj\n";
+print "MD5_OBJ_ASM   =$md5_obj\n";
+print "SHA1_OBJ_ASM  =$sha1_obj\n";
+print "RMD160_OBJ_ASM=$rmd160_obj\n";
 
 $des_ptr=0;
 $des_risc1=0;
@@ -287,8 +347,8 @@ foreach (sort split(/\s+/,$bn_ops))
 	$rc2_int=3 if /RC2_LONG/;
 	$bf_ptr=1 if $_ eq "BF_PTR";
 	$bf_ptr=2 if $_ eq "BF_PTR2";
-	($b64l,$b64,$b32,$b16,$b8)=(1,0,0,0,0) if /SIXTY_FOUR_BIT_LONG/;
 	($b64l,$b64,$b32,$b16,$b8)=(0,1,0,0,0) if /SIXTY_FOUR_BIT/;
+	($b64l,$b64,$b32,$b16,$b8)=(1,0,0,0,0) if /SIXTY_FOUR_BIT_LONG/;
 	($b64l,$b64,$b32,$b16,$b8)=(0,0,1,0,0) if /THIRTY_TWO_BIT/;
 	($b64l,$b64,$b32,$b16,$b8)=(0,0,0,1,0) if /SIXTEEN_BIT/;
 	($b64l,$b64,$b32,$b16,$b8)=(0,0,0,0,1) if /EIGHT_BIT/;
@@ -375,9 +435,9 @@ close(OUT);
 &Rename($rc4,&file_old($rc4));
 &Rename($n,$rc4);
 
-(($in=$rc4_enc) =~ s/\.([^.]+)/.$postfix/);
-$n=&file_new($rc4_enc);
-open(IN,"<".$in) || die "unable to read $rc4_enc:$!\n";
+(($in=$rc4_locl) =~ s/\.([^.]+)/.$postfix/);
+$n=&file_new($rc4_locl);
+open(IN,"<".$in) || die "unable to read $rc4_locl:$!\n";
 open(OUT,">$n") || die "unable to read $n:$!\n";
 while (<IN>)
 	{
@@ -388,8 +448,8 @@ while (<IN>)
 	}
 close(IN);
 close(OUT);
-&Rename($rc4_enc,&file_old($rc4_enc));
-&Rename($n,$rc4_enc);
+&Rename($rc4_locl,&file_old($rc4_locl));
+&Rename($n,$rc4_locl);
 
 (($in=$md2) =~ s/\.([^.]+)/.$postfix/);
 $n=&file_new($md2);

HISTORY

@@ -1,3 +1,193 @@
+16-Mar-98
+	- Patch for Cray T90 from Wayne Schroeder <schroede@SDSC.EDU>
+	- Lots and lots of changes
+
+29-Jan-98
+	- ASN1_BIT_STRING_set_bit()/ASN1_BIT_STRING_get_bit() from
+	  Goetz Babin-Ebell <babinebell@trustcenter.de>.
+	- SSL_version() now returns SSL2_VERSION, SSL3_VERSION or
+	  TLS1_VERSION.
+
+7-Jan-98
+	- Finally reworked the cipher string to ciphers again, so it
+	  works correctly
+	- All the app_data stuff is now ex_data with funcion calls to access.
+	  The index is supplied by a function and 'methods' can be setup
+	  for the types that are called on XXX_new/XXX_free.  This lets
+	  applications get notified on creation and destruction.  Some of
+	  the RSA methods could be implemented this way and I may do so.
+	- Oh yes, SSL under perl5 is working at the basic level.
+
+15-Dec-97
+	- Warning - the gethostbyname cache is not fully thread safe,
+	  but it should work well enough.
+	- Major internal reworking of the app_data stuff.  More functions
+	  but if you were accessing ->app_data directly, things will
+	  stop working.
+	- The perlv5 stuff is working.  Currently on message digests,
+	  ciphers and the bignum library.
+
+9-Dec-97
+	- Modified re-negotiation so that server initated re-neg
+	  will cause a SSL_read() to return -1 should retry.
+	  The danger otherwise was that the server and the
+	  client could end up both trying to read when using non-blocking
+	  sockets.
+
+4-Dec-97
+	- Lots of small changes
+	- Fix for binaray mode in Windows for the FILE BIO, thanks to
+	  Bob Denny <rdenny@dc3.com>
+
+17-Nov-97
+	- Quite a few internal cleanups, (removal of errno, and using macros
+	  defined in e_os.h).
+	- A bug in ca.c, pointed out by yasuyuki-ito@d-cruise.co.jp, where
+	  the automactic naming out output files was being stuffed up.
+
+29-Oct-97
+	- The Cast5 cipher has been added.  MD5 and SHA-1 are now in assember
+	  for x86.
+
+21-Oct-97
+	- Fixed a bug in the BIO_gethostbyname() cache.
+
+15-Oct-97
+	- cbc mode for blowfish/des/3des is now in assember.  Blowfish asm
+	  has also been improved.  At this point in time, on the pentium,
+	  md5 is %80 faster, the unoptimesed sha-1 is %79 faster,
+	  des-cbc is %28 faster, des-ede3-cbc is %9 faster and blowfish-cbc
+	  is %62 faster.
+
+12-Oct-97
+	- MEM_BUF_grow() has been fixed so that it always sets the buf->length
+	  to the value we are 'growing' to.  Think of MEM_BUF_grow() as the
+	  way to set the length value correctly.
+
+10-Oct-97
+	- I now hash for certificate lookup on the raw DER encoded RDN (md5).
+	  This breaks things again :-(.  This is efficent since I cache
+	  the DER encoding of the RDN.
+	- The text DN now puts in the numeric OID instead of UNKNOWN.
+	- req can now process arbitary OIDs in the config file.
+	- I've been implementing md5 in x86 asm, much faster :-).
+	- Started sha1 in x86 asm, needs more work.
+	- Quite a few speedups in the BN stuff.  RSA public operation
+	  has been made faster by caching the BN_MONT_CTX structure.
+	  The calulating of the Ai where A*Ai === 1 mod m was rather
+	  expensive.  Basically a 40-50% speedup on public operations.
+	  The RSA speedup is now 15% on pentiums and %20 on pentium
+	  pro.
+
+30-Sep-97
+	- After doing some profiling, I added x86 adm for bn_add_words(),
+	  which just adds 2 arrays of longs together.  A %10 speedup
+	  for 512 and 1024 bit RSA on the pentium pro.
+
+29-Sep-97
+	- Converted the x86 bignum assembler to us the perl scripts
+	  for generation.
+
+23-Sep-97
+	- If SSL_set_session() is passed a NULL session, it now clears the
+	  current session-id.
+
+22-Sep-97
+	- Added a '-ss_cert file' to apps/ca.c.  This will sign selfsigned
+	  certificates.
+	- Bug in crypto/evp/encode.c where by decoding of 65 base64
+	  encoded lines, one line at a time (via a memory BIO) would report
+	  EOF after the first line was decoded.
+	- Fix in X509_find_by_issuer_and_serial() from
+	  Dr Stephen Henson <shenson@bigfoot.com>
+
+19-Sep-97
+	- NO_FP_API and NO_STDIO added.
+	- Put in sh config command.  It auto runs Configure with the correct
+	  parameters.
+
+18-Sep-97
+	- Fix x509.c so if a DSA cert has different parameters to its parent,
+	  they are left in place.  Not tested yet.
+
+16-Sep-97
+	- ssl_create_cipher_list() had some bugs, fixes from
+	  Patrick Eisenacher <eisenach@stud.uni-frankfurt.de>
+	- Fixed a bug in the Base64 BIO, where it would return 1 instead
+	  of -1 when end of input was encountered but should retry.
+	  Basically a Base64/Memory BIO interaction problem.
+	- Added a HMAC set of functions in preporarion for TLS work.
+
+15-Sep-97
+	- Top level makefile tweak - Cameron Simpson <cs@zip.com.au>
+	- Prime generation spead up %25 (512 bit prime, pentium pro linux)
+	  by using montgomery multiplication in the prime number test.
+
+11-Sep-97
+	- Ugly bug in ssl3_write_bytes().  Basically if application land
+	  does a SSL_write(ssl,buf,len) where len > 16k, the SSLv3 write code
+	  did not check the size and tried to copy the entire buffer.
+	  This would tend to cause memory overwrites since SSLv3 has
+	  a maximum packet size of 16k.  If your program uses
+	  buffers <= 16k, you would probably never see this problem.
+	- Fixed a new errors that were cause by malloc() not returning
+	  0 initialised memory..
+	- SSL_OP_NETSCAPE_CA_DN_BUG was being switched on when using
+	  SSL_CTX_set_options(ssl_ctx,SSL_OP_ALL); which was a bad thing
+	  since this flags stops SSLeay being able to handle client
+	  cert requests correctly.
+
+08-Sep-97
+	- SSL_SESS_CACHE_NO_INTERNAL_LOOKUP option added.  When switched
+	  on, the SSL server routines will not use a SSL_SESSION that is
+	  held in it's cache.  This in intended to be used with the session-id
+	  callbacks so that while the session-ids are still stored in the
+	  cache, the decision to use them and how to look them up can be
+	  done by the callbacks.  The are the 'new', 'get' and 'remove'
+	  callbacks.  This can be used to determine the session-id
+	  to use depending on information like which port/host the connection
+	  is coming from.  Since the are also SSL_SESSION_set_app_data() and
+	  SSL_SESSION_get_app_data() functions, the application can hold
+	  information against the session-id as well.
+
+03-Sep-97
+	- Added lookup of CRLs to the by_dir method,
+	  X509_load_crl_file() also added.  Basically it means you can
+	  lookup CRLs via the same system used to lookup certificates.
+	- Changed things so that the X509_NAME structure can contain
+	  ASN.1 BIT_STRINGS which is required for the unique
+	  identifier OID.
+	- Fixed some problems with the auto flushing of the session-id
+	  cache.  It was not occuring on the server side.
+
+02-Sep-97
+	- Added SSL_CTX_sess_cache_size(SSL_CTX *ctx,unsigned long size)
+	  which is the maximum number of entries allowed in the
+	  session-id cache.  This is enforced with a simple FIFO list.
+	  The default size is 20*1024 entries which is rather large :-).
+	  The Timeout code is still always operating.
+
+01-Sep-97
+	- Added an argument to all the 'generate private key/prime`
+	  callbacks.  It is the last parameter so this should not
+	  break existing code but it is needed for C++.
+	- Added the BIO_FLAGS_BASE64_NO_NL flag for the BIO_f_base64()
+	  BIO.  This lets the BIO read and write base64 encoded data
+	  without inserting or looking for '\n' characters.  The '-A'
+	  flag turns this on when using apps/enc.c.
+	- RSA_NO_PADDING added to help BSAFE functionality.  This is a
+	  very dangerous thing to use, since RSA private key
+	  operations without random padding bytes (as PKCS#1 adds) can
+	  be attacked such that the private key can be revealed.
+	- ASN.1 bug and rc2-40-cbc and rc4-40 added by
+	  Dr Stephen Henson <shenson@bigfoot.com>
+
+31-Aug-97 (stuff added while I was away)	
+	- Linux pthreads by Tim Hudson (tjh@cryptsoft.com).
+	- RSA_flags() added allowing bypass of pub/priv match check
+	  in ssl/ssl_rsa.c - Tim Hudson.
+	- A few minor bugs.
+
 SSLeay 0.8.1 released.
 
 19-Jul-97

INSTALL

@@ -38,7 +38,7 @@ make -f Makefile.ssl links
 Makefile.ssl		CC CFLAG EX_LIBS BN_MULW
 crypto/des/des.h	DES_LONG
 crypto/des/des_locl.h	DES_PTR
-crypto/md/md2.h		MD2_INT
+crypto/md2/md2.h	MD2_INT
 crypto/rc4/rc4.h	RC4_INT
 crypto/rc4/rc4_enc.c	RC4_INDEX
 crypto/rc2/rc2.h	RC2_INT

MINFO

@@ -3,12 +3,13 @@ AR=ar r
 BASENAME=SSLeay
 BF_ENC=bf_enc.o
 BN_MULW=bn_mulw.o
+CAST_ENC=c_enc.o
 CC=cc
 CFLAG=-O -DNOPROTO
 DES_ENC=des_enc.o fcrypt_b.o
 DIRS=crypto ssl rsaref apps test tools
-EDIRS=times doc bugs util include certs ms shlib mt demos
-EX_HEADER=
+EDIRS=times doc bugs util include certs ms shlib mt demos perl dep
+EXHEADER=e_os.h
 EX_LIBS=
 GENERAL=Makefile
 HEADER=e_os.h
@@ -18,25 +19,32 @@ MAKE=make -f Makefile.ssl
 MAKEFILE=Makefile.ssl
 MAN1=1
 MAN3=3
-MISC=COPYRIGHT Configure HISTORY.066 INSTALL Makefile.ssl Makefile README TODO HISTORY README.066 README.080 VERSION PROBLEMS MINFO makefile.one e_os.h MICROSOFT makevms.com
-NAME=SSLeay-0.8.1
+MD5_ASM_OBJ=
+MISC=COPYRIGHT Configure HISTORY.066 INSTALL Makefile.ssl Makefile README TODO HISTORY README.066 README.080 README.090 VERSION PROBLEMS MINFO makefile.one e_os.h MICROSOFT makevms.com config PATENTS
+NAME=SSLeay-0.9.0
 ONEDIRS=out tmp
 PEX_LIBS=-L. -L.. -L../.. -L../../..
-SDIRS=md sha mdc2 des rc4 rc2 idea bf bn rsa dsa dh buffer bio stack lhash rand err objects evp pem asn1 x509 conf txt_db pkcs7
+RC4_ENC=rc4_enc.o
+RC5_ENC=rc5_enc.o
+RMD160_ASM_OBJ=
+SDIRS=md2 md5 sha mdc2 hmac ripemd des rc2 rc4 rc5 idea bf cast bn rsa dsa dh buffer bio stack lhash rand err objects evp pem asn1 x509 conf txt_db pkcs7
+SHA1_ASM_OBJ=
 SHELL=/bin/sh
-TARFILE=SSLeay-0.8.1.tar
+TARFILE=SSLeay-0.9.0.tar
 TOP=.
-VERSION=0.8.1
+VERSION=0.9.0
 WDIRS=windows
-WTARFILE=SSLeay-0.8.1-win.tar
+WTARFILE=SSLeay-0.9.0-win.tar
 RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=crypto
-ALL=Makefile README cryptlib.c mem.c cversion.c cryptlib.h date.h crypto.h cryptall.h
+ALL=Makefile README cryptlib.c mem.c cversion.c ex_data.c cpt_err.c cryptlib.h date.h crypto.h cryptall.h
 AR=ar r
 CC=cc
 CFLAG=-g
 CFLAGS=-I. -I../include -g -DCFLAGS=" \"cc -g\" "
 DIR=crypto
+ERR=crypto
+ERRC=cpt_err
 EXHEADER=crypto.h cryptall.h
 EX_LIBS=
 GENERAL=Makefile README
@@ -45,39 +53,64 @@ INCLUDE=-I. -I../include
 INCLUDES=-I.. -I../../include
 INSTALLTOP=/usr/local/ssl
 LIB=../libcrypto.a
-LIBOBJ=cryptlib.o mem.o cversion.o
+LIBOBJ=cryptlib.o mem.o cversion.o ex_data.o cpt_err.o
 LIBS=
-LIBSRC=cryptlib.c mem.c cversion.c
+LIBSRC=cryptlib.c mem.c cversion.c ex_data.c cpt_err.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
 PEX_LIBS=
 RM=/bin/rm -f
-SDIRS=md sha mdc2 des rc4 rc2 idea bf bn rsa dsa dh buffer bio stack lhash rand err objects evp pem x509 asn1 conf txt_db pkcs7
-SRC=cryptlib.c mem.c cversion.c
+SDIRS=md2 md5 sha mdc2 hmac ripemd des rc2 rc4 rc5 idea bf cast bn rsa dsa dh buffer bio stack lhash rand err objects evp pem x509 asn1 conf txt_db pkcs7
+SRC=cryptlib.c mem.c cversion.c ex_data.c cpt_err.c
 TOP=..
 RELATIVE_DIRECTORY=
-RELATIVE_DIRECTORY=crypto/md
-ALL=Makefile md2_dgst.c md5_dgst.c md2_one.c md5_one.c md5_locl.h md2.h md5.h
+RELATIVE_DIRECTORY=crypto/md2
+ALL=Makefile md2_dgst.c md5_one.c md2.h
 APPS=
 AR=ar r
 CC=cc
 CFLAG=-g
 CFLAGS= -g
 DIR=md
-EXHEADER=md2.h md5.h
+EXHEADER=md2.h
 GENERAL=Makefile
-HEADER=md5_locl.h md2.h md5.h
+HEADER=md2.h
 INCLUDES=
 INSTALLTOP=/usr/local/ssl
 LIB=../../libcrypto.a
-LIBOBJ=md2_dgst.o md5_dgst.o md2_one.o md5_one.o
-LIBSRC=md2_dgst.c md5_dgst.c md2_one.c md5_one.c
+LIBOBJ=md2_dgst.o md2_one.o
+LIBSRC=md2_dgst.c md5_one.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
-SRC=md2_dgst.c md5_dgst.c md2_one.c md5_one.c
-TEST=md2test.c md5test.c
+SRC=md2_dgst.c md5_one.c
+TEST=md2test.c
+TOP=../..
+RELATIVE_DIRECTORY=
+RELATIVE_DIRECTORY=crypto/md5
+ALL=Makefile md5_dgst.c md5_one.c md5_locl.h md5.h
+APPS=md5.c
+AR=ar r
+CC=cc
+CFLAG=-g
+CFLAGS= -g
+CPP=cc -E
+DIR=md5
+EXHEADER=md5.h
+GENERAL=Makefile
+HEADER=md5_locl.h md5.h
+INCLUDES=
+INSTALLTOP=/usr/local/ssl
+LIB=../../libcrypto.a
+LIBOBJ=md5_dgst.o md5_one.o 
+LIBSRC=md5_dgst.c md5_one.c
+MAKE=make -f Makefile.ssl
+MAKEDEPEND=makedepend -f Makefile.ssl
+MAKEFILE=Makefile.ssl
+MD5_ASM_OBJ=
+SRC=md5_dgst.c md5_one.c
+TEST=md5test.c
 TOP=../..
 RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=crypto/sha
@@ -94,11 +127,12 @@ HEADER=sha_locl.h sha.h
 INCLUDES=
 INSTALLTOP=/usr/local/ssl
 LIB=../../libcrypto.a
-LIBOBJ=sha_dgst.o sha1dgst.o sha_one.o sha1_one.o
+LIBOBJ=sha_dgst.o sha1dgst.o sha_one.o sha1_one.o 
 LIBSRC=sha_dgst.c sha1dgst.c sha_one.c sha1_one.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
+SHA1_ASM_OBJ=
 SRC=sha_dgst.c sha1dgst.c sha_one.c sha1_one.c
 TEST=shatest.c sha1test.c
 TOP=../..
@@ -126,8 +160,56 @@ SRC=mdc2dgst.c mdc2_one.c
 TEST=mdc2test.c
 TOP=../..
 RELATIVE_DIRECTORY=
+RELATIVE_DIRECTORY=crypto/hmac
+ALL=Makefile hmac.c hmac.h
+APPS=
+AR=ar r
+CC=cc
+CFLAG=-g
+CFLAGS= -g
+DIR=hmac
+EXHEADER=hmac.h
+GENERAL=Makefile
+HEADER=hmac.h
+INCLUDES=
+INSTALLTOP=/usr/local/ssl
+LIB=../../libcrypto.a
+LIBOBJ=hmac.o
+LIBSRC=hmac.c
+MAKE=make -f Makefile.ssl
+MAKEDEPEND=makedepend -f Makefile.ssl
+MAKEFILE=Makefile.ssl
+SRC=hmac.c
+TEST=hmactest.c
+TOP=../..
+RELATIVE_DIRECTORY=
+RELATIVE_DIRECTORY=crypto/ripemd
+ALL=Makefile rmd_dgst.c rmd_one.c rmd_locl.h rmdconst.h ripemd.h
+APPS=rmd160.c
+AR=ar r
+CC=cc
+CFLAG=-g
+CFLAGS= -g
+CPP=cc -E
+DIR=ripemd
+EXHEADER=ripemd.h
+GENERAL=Makefile
+HEADER=rmd_locl.h rmdconst.h ripemd.h
+INCLUDES=
+INSTALLTOP=/usr/local/ssl
+LIB=../../libcrypto.a
+LIBOBJ=rmd_dgst.o rmd_one.o 
+LIBSRC=rmd_dgst.c rmd_one.c
+MAKE=make -f Makefile.ssl
+MAKEDEPEND=makedepend -f Makefile.ssl
+MAKEFILE=Makefile.ssl
+RIP_ASM_OBJ=
+SRC=rmd_dgst.c rmd_one.c
+TEST=rmdtest.c
+TOP=../..
+RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=crypto/des
-ALL=Makefile des.org des_locl.org cbc3_enc.c cbc_cksm.c cbc_enc.c cfb64enc.c cfb_enc.c ecb3_enc.c ecb_enc.c ede_enc.c enc_read.c enc_writ.c fcrypt.c ncbc_enc.c ofb64enc.c ofb_enc.c pcbc_enc.c qud_cksm.c rand_key.c read_pwd.c rpc_enc.c set_key.c des_enc.c fcrypt_b.c read2pwd.c fcrypt.c xcbc_enc.c str2key.c cfb64ede.c ofb64ede.c supp.c des_locl.h rpc_des.h podd.h sk.h spr.h des_ver.h des.h
+ALL=Makefile des.org des_locl.org cbc_cksm.c cbc_enc.c cfb64enc.c cfb_enc.c ecb3_enc.c ecb_enc.c enc_read.c enc_writ.c fcrypt.c ofb64enc.c ofb_enc.c pcbc_enc.c qud_cksm.c rand_key.c read_pwd.c rpc_enc.c set_key.c des_enc.c fcrypt_b.c read2pwd.c fcrypt.c xcbc_enc.c str2key.c cfb64ede.c ofb64ede.c supp.c des_locl.h rpc_des.h podd.h sk.h spr.h des_ver.h des.h
 APPS=
 AR=ar r
 CC=cc
@@ -142,17 +224,40 @@ HEADER=des_locl.h rpc_des.h podd.h sk.h spr.h des_ver.h des.h
 INCLUDES=
 INSTALLTOP=/usr/local/ssl
 LIB=../../libcrypto.a
-LIBOBJ=set_key.o ecb_enc.o ede_enc.o cbc_enc.o cbc3_enc.o ecb3_enc.o cfb64enc.o cfb64ede.o cfb_enc.o ofb64ede.o enc_read.o enc_writ.o ncbc_enc.o ofb64enc.o ofb_enc.o str2key.o pcbc_enc.o qud_cksm.o rand_key.o des_enc.o fcrypt_b.o read2pwd.o fcrypt.o xcbc_enc.o read_pwd.o rpc_enc.o cbc_cksm.o supp.o
-LIBSRC=cbc3_enc.c cbc_cksm.c cbc_enc.c cfb64enc.c cfb_enc.c ecb3_enc.c ecb_enc.c ede_enc.c enc_read.c enc_writ.c fcrypt.c ncbc_enc.c ofb64enc.c ofb_enc.c pcbc_enc.c qud_cksm.c rand_key.c read_pwd.c rpc_enc.c set_key.c des_enc.c fcrypt_b.c read2pwd.c fcrypt.c xcbc_enc.c str2key.c cfb64ede.c ofb64ede.c supp.c
+LIBOBJ=set_key.o ecb_enc.o cbc_enc.o ecb3_enc.o cfb64enc.o cfb64ede.o cfb_enc.o ofb64ede.o enc_read.o enc_writ.o ofb64enc.o ofb_enc.o str2key.o pcbc_enc.o qud_cksm.o rand_key.o des_enc.o fcrypt_b.o read2pwd.o fcrypt.o xcbc_enc.o read_pwd.o rpc_enc.o cbc_cksm.o supp.o
+LIBSRC=cbc_cksm.c cbc_enc.c cfb64enc.c cfb_enc.c ecb3_enc.c ecb_enc.c enc_read.c enc_writ.c fcrypt.c ofb64enc.c ofb_enc.c pcbc_enc.c qud_cksm.c rand_key.c read_pwd.c rpc_enc.c set_key.c des_enc.c fcrypt_b.c read2pwd.c fcrypt.c xcbc_enc.c str2key.c cfb64ede.c ofb64ede.c supp.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
-SRC=cbc3_enc.c cbc_cksm.c cbc_enc.c cfb64enc.c cfb_enc.c ecb3_enc.c ecb_enc.c ede_enc.c enc_read.c enc_writ.c fcrypt.c ncbc_enc.c ofb64enc.c ofb_enc.c pcbc_enc.c qud_cksm.c rand_key.c read_pwd.c rpc_enc.c set_key.c des_enc.c fcrypt_b.c read2pwd.c fcrypt.c xcbc_enc.c str2key.c cfb64ede.c ofb64ede.c supp.c
+SRC=cbc_cksm.c cbc_enc.c cfb64enc.c cfb_enc.c ecb3_enc.c ecb_enc.c enc_read.c enc_writ.c fcrypt.c ofb64enc.c ofb_enc.c pcbc_enc.c qud_cksm.c rand_key.c read_pwd.c rpc_enc.c set_key.c des_enc.c fcrypt_b.c read2pwd.c fcrypt.c xcbc_enc.c str2key.c cfb64ede.c ofb64ede.c supp.c
 TEST=destest.c
 TOP=../..
 RELATIVE_DIRECTORY=
+RELATIVE_DIRECTORY=crypto/rc2
+ALL=Makefile rc2_ecb.c rc2_skey.c rc2_cbc.c rc2cfb64.c rc2ofb64.c rc2_locl.h rc2.h
+APPS=
+AR=ar r
+CC=cc
+CFLAG=-g
+CFLAGS= -g
+DIR=rc2
+EXHEADER=rc2.h
+GENERAL=Makefile
+HEADER=rc2_locl.h rc2.h
+INCLUDES=
+INSTALLTOP=/usr/local/ssl
+LIB=../../libcrypto.a
+LIBOBJ=rc2_ecb.o rc2_skey.o rc2_cbc.o rc2cfb64.o rc2ofb64.o
+LIBSRC=rc2_ecb.c rc2_skey.c rc2_cbc.c rc2cfb64.c rc2ofb64.c
+MAKE=make -f Makefile.ssl
+MAKEDEPEND=makedepend -f Makefile.ssl
+MAKEFILE=Makefile.ssl
+SRC=rc2_ecb.c rc2_skey.c rc2_cbc.c rc2cfb64.c rc2ofb64.c
+TEST=rc2test.c
+TOP=../..
+RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=crypto/rc4
-ALL=Makefile rc4_enc.c rc4.h
+ALL=Makefile rc4_skey.c rc4_enc.c rc4.h rc4_locl.h
 APPS=
 AR=ar r
 CC=cc
@@ -161,40 +266,43 @@ CFLAGS= -g
 DIR=rc4
 EXHEADER=rc4.h
 GENERAL=Makefile
-HEADER=rc4.h
+HEADER=rc4.h rc4_locl.h
 INCLUDES=
 INSTALLTOP=/usr/local/ssl
 LIB=../../libcrypto.a
-LIBOBJ=rc4_enc.o
-LIBSRC=rc4_enc.c
+LIBOBJ=rc4_skey.o rc4_enc.o
+LIBSRC=rc4_skey.c rc4_enc.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
-SRC=rc4_enc.c
+RC4_ENC=rc4_enc.o
+SRC=rc4_skey.c rc4_enc.c
 TEST=rc4test.c
 TOP=../..
 RELATIVE_DIRECTORY=
-RELATIVE_DIRECTORY=crypto/rc2
-ALL=Makefile rc2_ecb.c rc2_skey.c rc2_cbc.c rc2cfb64.c rc2ofb64.c rc2_locl.h rc2.h
+RELATIVE_DIRECTORY=crypto/rc5
+ALL=Makefile rc5_skey.c rc5_ecb.c rc5_enc.c rc5cfb64.c rc5ofb64.c rc5_locl.h rc5.h
 APPS=
 AR=ar r
 CC=cc
 CFLAG=-g
 CFLAGS= -g
-DIR=rc2
-EXHEADER=rc2.h
+CPP=cc -E
+DIR=rc5
+EXHEADER=rc5.h
 GENERAL=Makefile
-HEADER=rc2_locl.h rc2.h
+HEADER=rc5_locl.h rc5.h
 INCLUDES=
 INSTALLTOP=/usr/local/ssl
 LIB=../../libcrypto.a
-LIBOBJ=rc2_ecb.o rc2_skey.o rc2_cbc.o rc2cfb64.o rc2ofb64.o
-LIBSRC=rc2_ecb.c rc2_skey.c rc2_cbc.c rc2cfb64.c rc2ofb64.c
+LIBOBJ=rc5_skey.o rc5_ecb.o rc5_enc.o rc5cfb64.o rc5ofb64.o
+LIBSRC=rc5_skey.c rc5_ecb.c rc5_enc.c rc5cfb64.c rc5ofb64.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
-SRC=rc2_ecb.c rc2_skey.c rc2_cbc.c rc2cfb64.c rc2ofb64.c
-TEST=rc2test.c
+RC5_ENC=rc5_enc.o
+SRC=rc5_skey.c rc5_ecb.c rc5_enc.c rc5cfb64.c rc5ofb64.c
+TEST=rc5test.c
 TOP=../..
 RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=crypto/idea
@@ -221,7 +329,7 @@ TEST=ideatest.c
 TOP=../..
 RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=crypto/bf
-ALL=Makefile bf_skey.c bf_ecb.c bf_enc.c bf_cbc.c bf_cfb64.c bf_ofb64.c bf_pi.h bf_locl.h blowfish.h
+ALL=Makefile bf_skey.c bf_ecb.c bf_enc.c bf_cfb64.c bf_ofb64.c bf_pi.h bf_locl.h blowfish.h
 APPS=
 AR=ar r
 BF_ENC=bf_enc.o
@@ -236,17 +344,42 @@ HEADER=bf_pi.h bf_locl.h blowfish.h
 INCLUDES=
 INSTALLTOP=/usr/local/ssl
 LIB=../../libcrypto.a
-LIBOBJ=bf_skey.o bf_ecb.o bf_enc.o bf_cbc.o bf_cfb64.o bf_ofb64.o
-LIBSRC=bf_skey.c bf_ecb.c bf_enc.c bf_cbc.c bf_cfb64.c bf_ofb64.c
+LIBOBJ=bf_skey.o bf_ecb.o bf_enc.o bf_cfb64.o bf_ofb64.o
+LIBSRC=bf_skey.c bf_ecb.c bf_enc.c bf_cfb64.c bf_ofb64.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
-SRC=bf_skey.c bf_ecb.c bf_enc.c bf_cbc.c bf_cfb64.c bf_ofb64.c
+SRC=bf_skey.c bf_ecb.c bf_enc.c bf_cfb64.c bf_ofb64.c
 TEST=bftest.c
 TOP=../..
 RELATIVE_DIRECTORY=
+RELATIVE_DIRECTORY=crypto/cast
+ALL=Makefile c_skey.c c_ecb.c c_enc.c c_cfb64.c c_ofb64.c cast_s.h cast_lcl.h cast.h
+APPS=
+AR=ar r
+CAST_ENC=c_enc.o
+CC=cc
+CFLAG=-g
+CFLAGS= -g
+CPP=cc -E
+DIR=cast
+EXHEADER=cast.h
+GENERAL=Makefile
+HEADER=cast_s.h cast_lcl.h cast.h
+INCLUDES=
+INSTALLTOP=/usr/local/ssl
+LIB=../../libcrypto.a
+LIBOBJ=c_skey.o c_ecb.o c_enc.o c_cfb64.o c_ofb64.o
+LIBSRC=c_skey.c c_ecb.c c_enc.c c_cfb64.c c_ofb64.c
+MAKE=make -f Makefile.ssl
+MAKEDEPEND=makedepend -f Makefile.ssl
+MAKEFILE=Makefile.ssl
+SRC=c_skey.c c_ecb.c c_enc.c c_cfb64.c c_ofb64.c
+TEST=casttest.c
+TOP=../..
+RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=crypto/bn
-ALL=Makefile bn_add.c bn_div.c bn_exp.c bn_lib.c bn_mod.c bn_mul.c bn_print.c bn_rand.c bn_shift.c bn_sub.c bn_word.c bn_gcd.c bn_prime.c bn_err.c bn_sqr.c bn_mulw.c bn_recp.c bn_mont.c bn_lcl.h bn_prime.h bn.h
+ALL=Makefile bn_add.c bn_div.c bn_exp.c bn_lib.c bn_mod.c bn_mul.c bn_print.c bn_rand.c bn_shift.c bn_sub.c bn_word.c bn_blind.c bn_gcd.c bn_prime.c bn_err.c bn_sqr.c bn_mulw.c bn_recp.c bn_mont.c bn_mpi.c bn_lcl.h bn_prime.h bn.h
 APPS=
 AR=ar r
 BN_MULW=bn_mulw.o
@@ -262,17 +395,17 @@ HEADER=bn_lcl.h bn_prime.h bn.h
 INCLUDES=-I.. -I../../include
 INSTALLTOP=/usr/local/ssl
 LIB=../../libcrypto.a
-LIBOBJ=bn_add.o bn_div.o bn_exp.o bn_lib.o bn_mod.o bn_mul.o bn_print.o bn_rand.o bn_shift.o bn_sub.o bn_word.o bn_gcd.o bn_prime.o bn_err.o bn_sqr.o bn_mulw.o bn_recp.o bn_mont.o
-LIBSRC=bn_add.c bn_div.c bn_exp.c bn_lib.c bn_mod.c bn_mul.c bn_print.c bn_rand.c bn_shift.c bn_sub.c bn_word.c bn_gcd.c bn_prime.c bn_err.c bn_sqr.c bn_mulw.c bn_recp.c bn_mont.c
+LIBOBJ=bn_add.o bn_div.o bn_exp.o bn_lib.o bn_mod.o bn_mul.o bn_print.o bn_rand.o bn_shift.o bn_sub.o bn_word.o bn_blind.o bn_gcd.o bn_prime.o bn_err.o bn_sqr.o bn_mulw.o bn_recp.o bn_mont.o bn_mpi.o
+LIBSRC=bn_add.c bn_div.c bn_exp.c bn_lib.c bn_mod.c bn_mul.c bn_print.c bn_rand.c bn_shift.c bn_sub.c bn_word.c bn_blind.c bn_gcd.c bn_prime.c bn_err.c bn_sqr.c bn_mulw.c bn_recp.c bn_mont.c bn_mpi.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
-SRC=bn_add.c bn_div.c bn_exp.c bn_lib.c bn_mod.c bn_mul.c bn_print.c bn_rand.c bn_shift.c bn_sub.c bn_word.c bn_gcd.c bn_prime.c bn_err.c bn_sqr.c bn_mulw.c bn_recp.c bn_mont.c
+SRC=bn_add.c bn_div.c bn_exp.c bn_lib.c bn_mod.c bn_mul.c bn_print.c bn_rand.c bn_shift.c bn_sub.c bn_word.c bn_blind.c bn_gcd.c bn_prime.c bn_err.c bn_sqr.c bn_mulw.c bn_recp.c bn_mont.c bn_mpi.c
 TEST=bntest.c exptest.c
 TOP=../..
 RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=crypto/rsa
-ALL=Makefile rsa_enc.c rsa_gen.c rsa_lib.c rsa_sign.c rsa_saos.c rsa_err.c rsa.h
+ALL=Makefile rsa_eay.c rsa_gen.c rsa_lib.c rsa_sign.c rsa_saos.c rsa_err.c rsa_pk1.c rsa_ssl.c rsa_none.c rsa.h
 APPS=
 AR=ar r
 CC=cc
@@ -287,12 +420,12 @@ HEADER=rsa.h
 INCLUDES=-I.. -I../../include
 INSTALLTOP=/usr/local/ssl
 LIB=../../libcrypto.a
-LIBOBJ=rsa_enc.o rsa_gen.o rsa_lib.o rsa_sign.o rsa_saos.o rsa_err.o
-LIBSRC=rsa_enc.c rsa_gen.c rsa_lib.c rsa_sign.c rsa_saos.c rsa_err.c
+LIBOBJ=rsa_eay.o rsa_gen.o rsa_lib.o rsa_sign.o rsa_saos.o rsa_err.o rsa_pk1.o rsa_ssl.o rsa_none.o
+LIBSRC=rsa_eay.c rsa_gen.c rsa_lib.c rsa_sign.c rsa_saos.c rsa_err.c rsa_pk1.c rsa_ssl.c rsa_none.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
-SRC=rsa_enc.c rsa_gen.c rsa_lib.c rsa_sign.c rsa_saos.c rsa_err.c
+SRC=rsa_eay.c rsa_gen.c rsa_lib.c rsa_sign.c rsa_saos.c rsa_err.c rsa_pk1.c rsa_ssl.c rsa_none.c
 TEST=
 TOP=../..
 RELATIVE_DIRECTORY=
@@ -372,7 +505,7 @@ TEST=
 TOP=../..
 RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=crypto/bio
-ALL=Makefile bio_lib.c bio_cb.c bio_err.c bss_mem.c bss_null.c bss_fd.c bss_file.c bss_sock.c bss_conn.c bf_null.c bf_buff.c b_print.c b_dump.c b_sock.c bss_acpt.c bf_nbio.c bio.h
+ALL=Makefile bio_lib.c bio_cb.c bio_err.c bss_mem.c bss_null.c bss_fd.c bss_file.c bss_sock.c bss_conn.c bf_null.c bf_buff.c b_print.c b_dump.c b_sock.c bss_acpt.c bf_nbio.c bio.h bss_file.c
 APPS=
 AR=ar r
 CC=cc
@@ -381,9 +514,9 @@ CFLAGS=-I.. -I../../include -g
 DIR=bio
 ERR=bio
 ERRC=bio_err
-EXHEADER=bio.h
+EXHEADER=bio.h bss_file.c
 GENERAL=Makefile
-HEADER=bio.h
+HEADER=bio.h bss_file.c
 INCLUDES=-I.. -I../../include
 INSTALLTOP=/usr/local/ssl
 LIB=../../libcrypto.a
@@ -472,7 +605,7 @@ AR=ar r
 CC=cc
 CFLAG=-g
 CFLAGS=-I.. -I../../include -g
-DIR=error
+DIR=err
 EXHEADER=err.h
 GENERAL=Makefile
 HEADER=err.h
@@ -514,7 +647,7 @@ TEST=
 TOP=../..
 RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=crypto/evp
-ALL=Makefile encode.c digest.c evp_enc.c evp_key.c e_ecb_d.c e_cbc_d.c e_cfb_d.c e_ofb_d.c e_ecb_i.c e_cbc_i.c e_cfb_i.c e_ofb_i.c e_ecb_3d.c e_cbc_3d.c e_rc4.c names.c e_cfb_3d.c e_ofb_3d.c e_xcbc_d.c e_ecb_r2.c e_cbc_r2.c e_cfb_r2.c e_ofb_r2.c e_ecb_bf.c e_cbc_bf.c e_cfb_bf.c e_ofb_bf.c m_null.c m_md2.c m_md5.c m_sha.c m_sha1.c m_dss.c m_dss1.c m_mdc2.c p_open.c p_seal.c p_sign.c p_verify.c p_lib.c bio_md.c bio_b64.c bio_enc.c evp_err.c e_null.c c_all.c evp.h
+ALL=Makefile encode.c digest.c evp_enc.c evp_key.c e_ecb_d.c e_cbc_d.c e_cfb_d.c e_ofb_d.c e_ecb_i.c e_cbc_i.c e_cfb_i.c e_ofb_i.c e_ecb_3d.c e_cbc_3d.c e_rc4.c names.c e_cfb_3d.c e_ofb_3d.c e_xcbc_d.c e_ecb_r2.c e_cbc_r2.c e_cfb_r2.c e_ofb_r2.c e_ecb_bf.c e_cbc_bf.c e_cfb_bf.c e_ofb_bf.c e_ecb_c.c e_cbc_c.c e_cfb_c.c e_ofb_c.c e_ecb_r5.c e_cbc_r5.c e_cfb_r5.c e_ofb_r5.c m_null.c m_md2.c m_md5.c m_sha.c m_sha1.c m_dss.c m_dss1.c m_mdc2.c m_ripemd.c p_open.c p_seal.c p_sign.c p_verify.c p_lib.c p_enc.c p_dec.c bio_md.c bio_b64.c bio_enc.c evp_err.c e_null.c c_all.c evp_lib.c evp.h
 APPS=
 AR=ar r
 CC=cc
@@ -529,12 +662,12 @@ HEADER=evp.h
 INCLUDES=-I.. -I../../include
 INSTALLTOP=/usr/local/ssl
 LIB=../../libcrypto.a
-LIBOBJ=encode.o digest.o evp_enc.o evp_key.o e_ecb_d.o e_cbc_d.o e_cfb_d.o e_ofb_d.o e_ecb_i.o e_cbc_i.o e_cfb_i.o e_ofb_i.o e_ecb_3d.o e_cbc_3d.o e_rc4.o names.o e_cfb_3d.o e_ofb_3d.o e_xcbc_d.o e_ecb_r2.o e_cbc_r2.o e_cfb_r2.o e_ofb_r2.o e_ecb_bf.o e_cbc_bf.o e_cfb_bf.o e_ofb_bf.o m_null.o m_md2.o m_md5.o m_sha.o m_sha1.o m_dss.o m_dss1.o m_mdc2.o p_open.o p_seal.o p_sign.o p_verify.o p_lib.o bio_md.o bio_b64.o bio_enc.o evp_err.o e_null.o c_all.o
-LIBSRC=encode.c digest.c evp_enc.c evp_key.c e_ecb_d.c e_cbc_d.c e_cfb_d.c e_ofb_d.c e_ecb_i.c e_cbc_i.c e_cfb_i.c e_ofb_i.c e_ecb_3d.c e_cbc_3d.c e_rc4.c names.c e_cfb_3d.c e_ofb_3d.c e_xcbc_d.c e_ecb_r2.c e_cbc_r2.c e_cfb_r2.c e_ofb_r2.c e_ecb_bf.c e_cbc_bf.c e_cfb_bf.c e_ofb_bf.c m_null.c m_md2.c m_md5.c m_sha.c m_sha1.c m_dss.c m_dss1.c m_mdc2.c p_open.c p_seal.c p_sign.c p_verify.c p_lib.c bio_md.c bio_b64.c bio_enc.c evp_err.c e_null.c c_all.c
+LIBOBJ=encode.o digest.o evp_enc.o evp_key.o e_ecb_d.o e_cbc_d.o e_cfb_d.o e_ofb_d.o e_ecb_i.o e_cbc_i.o e_cfb_i.o e_ofb_i.o e_ecb_3d.o e_cbc_3d.o e_rc4.o names.o e_cfb_3d.o e_ofb_3d.o e_xcbc_d.o e_ecb_r2.o e_cbc_r2.o e_cfb_r2.o e_ofb_r2.o e_ecb_bf.o e_cbc_bf.o e_cfb_bf.o e_ofb_bf.o e_ecb_c.o e_cbc_c.o e_cfb_c.o e_ofb_c.o e_ecb_r5.o e_cbc_r5.o e_cfb_r5.o e_ofb_r5.o m_null.o m_md2.o m_md5.o m_sha.o m_sha1.o m_dss.o m_dss1.o m_mdc2.o m_ripemd.o p_open.o p_seal.o p_sign.o p_verify.o p_lib.o p_enc.o p_dec.o bio_md.o bio_b64.o bio_enc.o evp_err.o e_null.o c_all.o evp_lib.o
+LIBSRC=encode.c digest.c evp_enc.c evp_key.c e_ecb_d.c e_cbc_d.c e_cfb_d.c e_ofb_d.c e_ecb_i.c e_cbc_i.c e_cfb_i.c e_ofb_i.c e_ecb_3d.c e_cbc_3d.c e_rc4.c names.c e_cfb_3d.c e_ofb_3d.c e_xcbc_d.c e_ecb_r2.c e_cbc_r2.c e_cfb_r2.c e_ofb_r2.c e_ecb_bf.c e_cbc_bf.c e_cfb_bf.c e_ofb_bf.c e_ecb_c.c e_cbc_c.c e_cfb_c.c e_ofb_c.c e_ecb_r5.c e_cbc_r5.c e_cfb_r5.c e_ofb_r5.c m_null.c m_md2.c m_md5.c m_sha.c m_sha1.c m_dss.c m_dss1.c m_mdc2.c m_ripemd.c p_open.c p_seal.c p_sign.c p_verify.c p_lib.c p_enc.c p_dec.c bio_md.c bio_b64.c bio_enc.c evp_err.c e_null.c c_all.c evp_lib.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
-SRC=encode.c digest.c evp_enc.c evp_key.c e_ecb_d.c e_cbc_d.c e_cfb_d.c e_ofb_d.c e_ecb_i.c e_cbc_i.c e_cfb_i.c e_ofb_i.c e_ecb_3d.c e_cbc_3d.c e_rc4.c names.c e_cfb_3d.c e_ofb_3d.c e_xcbc_d.c e_ecb_r2.c e_cbc_r2.c e_cfb_r2.c e_ofb_r2.c e_ecb_bf.c e_cbc_bf.c e_cfb_bf.c e_ofb_bf.c m_null.c m_md2.c m_md5.c m_sha.c m_sha1.c m_dss.c m_dss1.c m_mdc2.c p_open.c p_seal.c p_sign.c p_verify.c p_lib.c bio_md.c bio_b64.c bio_enc.c evp_err.c e_null.c c_all.c
+SRC=encode.c digest.c evp_enc.c evp_key.c e_ecb_d.c e_cbc_d.c e_cfb_d.c e_ofb_d.c e_ecb_i.c e_cbc_i.c e_cfb_i.c e_ofb_i.c e_ecb_3d.c e_cbc_3d.c e_rc4.c names.c e_cfb_3d.c e_ofb_3d.c e_xcbc_d.c e_ecb_r2.c e_cbc_r2.c e_cfb_r2.c e_ofb_r2.c e_ecb_bf.c e_cbc_bf.c e_cfb_bf.c e_ofb_bf.c e_ecb_c.c e_cbc_c.c e_cfb_c.c e_ofb_c.c e_ecb_r5.c e_cbc_r5.c e_cfb_r5.c e_ofb_r5.c m_null.c m_md2.c m_md5.c m_sha.c m_sha1.c m_dss.c m_dss1.c m_mdc2.c m_ripemd.c p_open.c p_seal.c p_sign.c p_verify.c p_lib.c p_enc.c p_dec.c bio_md.c bio_b64.c bio_enc.c evp_err.c e_null.c c_all.c evp_lib.c
 TEST=
 TOP=../..
 RELATIVE_DIRECTORY=
@@ -565,7 +698,7 @@ TEST=
 TOP=../..
 RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=crypto/asn1
-ALL=Makefile README a_object.c a_bitstr.c a_utctm.c a_int.c a_octet.c a_print.c a_type.c a_set.c a_dup.c a_d2i_fp.c a_i2d_fp.c a_sign.c a_digest.c a_verify.c x_algor.c x_val.c x_pubkey.c x_sig.c x_req.c x_attrib.c x_name.c x_cinf.c x_x509.c x_crl.c x_info.c x_spki.c d2i_r_pr.c i2d_r_pr.c d2i_r_pu.c i2d_r_pu.c d2i_s_pr.c i2d_s_pr.c d2i_s_pu.c i2d_s_pu.c d2i_pu.c d2i_pr.c i2d_pu.c i2d_pr.c t_req.c t_x509.c t_pkey.c p7_i_s.c p7_signi.c p7_signd.c p7_recip.c p7_enc_c.c p7_evp.c p7_dgst.c p7_s_e.c p7_enc.c p7_lib.c f_int.c f_string.c i2d_dhp.c i2d_dsap.c d2i_dhp.c d2i_dsap.c n_pkey.c a_hdr.c x_pkey.c a_bool.c x_exten.c asn1_par.c asn1_lib.c asn1_err.c a_meth.c a_bytes.c asn1.h asn1_mac.h
+ALL=Makefile README a_object.c a_bitstr.c a_utctm.c a_int.c a_octet.c a_print.c a_type.c a_set.c a_dup.c a_d2i_fp.c a_i2d_fp.c a_sign.c a_digest.c a_verify.c x_algor.c x_val.c x_pubkey.c x_sig.c x_req.c x_attrib.c x_name.c x_cinf.c x_x509.c x_crl.c x_info.c x_spki.c d2i_r_pr.c i2d_r_pr.c d2i_r_pu.c i2d_r_pu.c d2i_s_pr.c i2d_s_pr.c d2i_s_pu.c i2d_s_pu.c d2i_pu.c d2i_pr.c i2d_pu.c i2d_pr.c t_req.c t_x509.c t_pkey.c p7_i_s.c p7_signi.c p7_signd.c p7_recip.c p7_enc_c.c p7_evp.c p7_dgst.c p7_s_e.c p7_enc.c p7_lib.c f_int.c f_string.c i2d_dhp.c i2d_dsap.c d2i_dhp.c d2i_dsap.c n_pkey.c a_hdr.c x_pkey.c a_bool.c x_exten.c asn1_par.c asn1_lib.c asn1_err.c a_meth.c a_bytes.c evp_asn1.c asn1.h asn1_mac.h
 APPS=
 AR=ar r
 CC=cc
@@ -580,12 +713,12 @@ HEADER=asn1.h asn1_mac.h
 INCLUDES=-I.. -I../../include
 INSTALLTOP=/usr/local/ssl
 LIB=../../libcrypto.a
-LIBOBJ=a_object.o a_bitstr.o a_utctm.o a_int.o a_octet.o a_print.o a_type.o a_set.o a_dup.o a_d2i_fp.o a_i2d_fp.o a_sign.o a_digest.o a_verify.o x_algor.o x_val.o x_pubkey.o x_sig.o x_req.o x_attrib.o x_name.o x_cinf.o x_x509.o x_crl.o x_info.o x_spki.o d2i_r_pr.o i2d_r_pr.o d2i_r_pu.o i2d_r_pu.o d2i_s_pr.o i2d_s_pr.o d2i_s_pu.o i2d_s_pu.o d2i_pu.o d2i_pr.o i2d_pu.o i2d_pr.o t_req.o t_x509.o t_pkey.o p7_i_s.o p7_signi.o p7_signd.o p7_recip.o p7_enc_c.o p7_evp.o p7_dgst.o p7_s_e.o p7_enc.o p7_lib.o f_int.o f_string.o i2d_dhp.o i2d_dsap.o d2i_dhp.o d2i_dsap.o n_pkey.o a_hdr.o x_pkey.o a_bool.o x_exten.o asn1_par.o asn1_lib.o asn1_err.o a_meth.o a_bytes.o
-LIBSRC=a_object.c a_bitstr.c a_utctm.c a_int.c a_octet.c a_print.c a_type.c a_set.c a_dup.c a_d2i_fp.c a_i2d_fp.c a_sign.c a_digest.c a_verify.c x_algor.c x_val.c x_pubkey.c x_sig.c x_req.c x_attrib.c x_name.c x_cinf.c x_x509.c x_crl.c x_info.c x_spki.c d2i_r_pr.c i2d_r_pr.c d2i_r_pu.c i2d_r_pu.c d2i_s_pr.c i2d_s_pr.c d2i_s_pu.c i2d_s_pu.c d2i_pu.c d2i_pr.c i2d_pu.c i2d_pr.c t_req.c t_x509.c t_pkey.c p7_i_s.c p7_signi.c p7_signd.c p7_recip.c p7_enc_c.c p7_evp.c p7_dgst.c p7_s_e.c p7_enc.c p7_lib.c f_int.c f_string.c i2d_dhp.c i2d_dsap.c d2i_dhp.c d2i_dsap.c n_pkey.c a_hdr.c x_pkey.c a_bool.c x_exten.c asn1_par.c asn1_lib.c asn1_err.c a_meth.c a_bytes.c
+LIBOBJ=a_object.o a_bitstr.o a_utctm.o a_int.o a_octet.o a_print.o a_type.o a_set.o a_dup.o a_d2i_fp.o a_i2d_fp.o a_sign.o a_digest.o a_verify.o x_algor.o x_val.o x_pubkey.o x_sig.o x_req.o x_attrib.o x_name.o x_cinf.o x_x509.o x_crl.o x_info.o x_spki.o d2i_r_pr.o i2d_r_pr.o d2i_r_pu.o i2d_r_pu.o d2i_s_pr.o i2d_s_pr.o d2i_s_pu.o i2d_s_pu.o d2i_pu.o d2i_pr.o i2d_pu.o i2d_pr.o t_req.o t_x509.o t_pkey.o p7_i_s.o p7_signi.o p7_signd.o p7_recip.o p7_enc_c.o p7_evp.o p7_dgst.o p7_s_e.o p7_enc.o p7_lib.o f_int.o f_string.o i2d_dhp.o i2d_dsap.o d2i_dhp.o d2i_dsap.o n_pkey.o a_hdr.o x_pkey.o a_bool.o x_exten.o asn1_par.o asn1_lib.o asn1_err.o a_meth.o a_bytes.o evp_asn1.o
+LIBSRC=a_object.c a_bitstr.c a_utctm.c a_int.c a_octet.c a_print.c a_type.c a_set.c a_dup.c a_d2i_fp.c a_i2d_fp.c a_sign.c a_digest.c a_verify.c x_algor.c x_val.c x_pubkey.c x_sig.c x_req.c x_attrib.c x_name.c x_cinf.c x_x509.c x_crl.c x_info.c x_spki.c d2i_r_pr.c i2d_r_pr.c d2i_r_pu.c i2d_r_pu.c d2i_s_pr.c i2d_s_pr.c d2i_s_pu.c i2d_s_pu.c d2i_pu.c d2i_pr.c i2d_pu.c i2d_pr.c t_req.c t_x509.c t_pkey.c p7_i_s.c p7_signi.c p7_signd.c p7_recip.c p7_enc_c.c p7_evp.c p7_dgst.c p7_s_e.c p7_enc.c p7_lib.c f_int.c f_string.c i2d_dhp.c i2d_dsap.c d2i_dhp.c d2i_dsap.c n_pkey.c a_hdr.c x_pkey.c a_bool.c x_exten.c asn1_par.c asn1_lib.c asn1_err.c a_meth.c a_bytes.c evp_asn1.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
-SRC=a_object.c a_bitstr.c a_utctm.c a_int.c a_octet.c a_print.c a_type.c a_set.c a_dup.c a_d2i_fp.c a_i2d_fp.c a_sign.c a_digest.c a_verify.c x_algor.c x_val.c x_pubkey.c x_sig.c x_req.c x_attrib.c x_name.c x_cinf.c x_x509.c x_crl.c x_info.c x_spki.c d2i_r_pr.c i2d_r_pr.c d2i_r_pu.c i2d_r_pu.c d2i_s_pr.c i2d_s_pr.c d2i_s_pu.c i2d_s_pu.c d2i_pu.c d2i_pr.c i2d_pu.c i2d_pr.c t_req.c t_x509.c t_pkey.c p7_i_s.c p7_signi.c p7_signd.c p7_recip.c p7_enc_c.c p7_evp.c p7_dgst.c p7_s_e.c p7_enc.c p7_lib.c f_int.c f_string.c i2d_dhp.c i2d_dsap.c d2i_dhp.c d2i_dsap.c n_pkey.c a_hdr.c x_pkey.c a_bool.c x_exten.c asn1_par.c asn1_lib.c asn1_err.c a_meth.c a_bytes.c
+SRC=a_object.c a_bitstr.c a_utctm.c a_int.c a_octet.c a_print.c a_type.c a_set.c a_dup.c a_d2i_fp.c a_i2d_fp.c a_sign.c a_digest.c a_verify.c x_algor.c x_val.c x_pubkey.c x_sig.c x_req.c x_attrib.c x_name.c x_cinf.c x_x509.c x_crl.c x_info.c x_spki.c d2i_r_pr.c i2d_r_pr.c d2i_r_pu.c i2d_r_pu.c d2i_s_pr.c i2d_s_pr.c d2i_s_pu.c i2d_s_pu.c d2i_pu.c d2i_pr.c i2d_pu.c i2d_pr.c t_req.c t_x509.c t_pkey.c p7_i_s.c p7_signi.c p7_signd.c p7_recip.c p7_enc_c.c p7_evp.c p7_dgst.c p7_s_e.c p7_enc.c p7_lib.c f_int.c f_string.c i2d_dhp.c i2d_dsap.c d2i_dhp.c d2i_dsap.c n_pkey.c a_hdr.c x_pkey.c a_bool.c x_exten.c asn1_par.c asn1_lib.c asn1_err.c a_meth.c a_bytes.c evp_asn1.c
 TEST=
 TOP=../..
 RELATIVE_DIRECTORY=
@@ -688,7 +821,7 @@ TEST=
 TOP=../..
 RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=ssl
-ALL=Makefile README s2_meth.c s2_srvr.c s2_clnt.c s2_lib.c s2_pkt.c s2_enc.c s3_meth.c s3_srvr.c s3_clnt.c s3_lib.c s3_pkt.c s3_enc.c s3_both.c s23_meth.c s23_srvr.c s23_clnt.c s23_lib.c s23_pkt.c ssl_lib.c ssl_err2.c ssl_cert.c ssl_sess.c ssl_ciph.c ssl_stat.c ssl_rsa.c ssl_asn1.c ssl_txt.c ssl_algs.c bio_ssl.c ssl_err.c ssl.h ssl2.h ssl3.h ssl23.h ssl_locl.h
+ALL=Makefile README s2_meth.c s2_srvr.c s2_clnt.c s2_lib.c s2_enc.c s2_pkt.c s3_meth.c s3_srvr.c s3_clnt.c s3_lib.c s3_enc.c s3_pkt.c s3_both.c s23_meth.c s23_srvr.c s23_clnt.c s23_lib.c s23_pkt.c t1_meth.c t1_srvr.c t1_clnt.c t1_lib.c t1_enc.c ssl_lib.c ssl_err2.c ssl_cert.c ssl_sess.c ssl_ciph.c ssl_stat.c ssl_rsa.c ssl_asn1.c ssl_txt.c ssl_algs.c bio_ssl.c ssl_err.c ssl.h ssl2.h ssl3.h ssl23.h tls1.h ssl_locl.h
 APPS=
 AR=ar r
 CC=cc
@@ -697,18 +830,18 @@ CFLAGS=-I../crypto -I../include -g
 DIR=ssl
 ERR=ssl
 ERRC=ssl_err
-EXHEADER=ssl.h ssl2.h ssl3.h ssl23.h
+EXHEADER=ssl.h ssl2.h ssl3.h ssl23.h tls1.h
 GENERAL=Makefile README
-HEADER=ssl.h ssl2.h ssl3.h ssl23.h ssl_locl.h
+HEADER=ssl.h ssl2.h ssl3.h ssl23.h tls1.h ssl_locl.h
 INCLUDES=-I../crypto -I../include
 INSTALLTOP=/usr/local/ssl
 LIB=../libssl.a
-LIBOBJ=s2_meth.o s2_srvr.o s2_clnt.o s2_lib.o s2_pkt.o s2_enc.o s3_meth.o s3_srvr.o s3_clnt.o s3_lib.o s3_pkt.o s3_enc.o s3_both.o s23_meth.o s23_srvr.o s23_clnt.o s23_lib.o s23_pkt.o ssl_lib.o ssl_err2.o ssl_cert.o ssl_sess.o ssl_ciph.o ssl_stat.o ssl_rsa.o ssl_asn1.o ssl_txt.o ssl_algs.o bio_ssl.o ssl_err.o
-LIBSRC=s2_meth.c s2_srvr.c s2_clnt.c s2_lib.c s2_pkt.c s2_enc.c s3_meth.c s3_srvr.c s3_clnt.c s3_lib.c s3_pkt.c s3_enc.c s3_both.c s23_meth.c s23_srvr.c s23_clnt.c s23_lib.c s23_pkt.c ssl_lib.c ssl_err2.c ssl_cert.c ssl_sess.c ssl_ciph.c ssl_stat.c ssl_rsa.c ssl_asn1.c ssl_txt.c ssl_algs.c bio_ssl.c ssl_err.c
+LIBOBJ=s2_meth.o s2_srvr.o s2_clnt.o s2_lib.o s2_enc.o s2_pkt.o s3_meth.o s3_srvr.o s3_clnt.o s3_lib.o s3_enc.o s3_pkt.o s3_both.o s23_meth.o s23_srvr.o s23_clnt.o s23_lib.o s23_pkt.o t1_meth.o t1_srvr.o t1_clnt.o t1_lib.o t1_enc.o ssl_lib.o ssl_err2.o ssl_cert.o ssl_sess.o ssl_ciph.o ssl_stat.o ssl_rsa.o ssl_asn1.o ssl_txt.o ssl_algs.o bio_ssl.o ssl_err.o
+LIBSRC=s2_meth.c s2_srvr.c s2_clnt.c s2_lib.c s2_enc.c s2_pkt.c s3_meth.c s3_srvr.c s3_clnt.c s3_lib.c s3_enc.c s3_pkt.c s3_both.c s23_meth.c s23_srvr.c s23_clnt.c s23_lib.c s23_pkt.c t1_meth.c t1_srvr.c t1_clnt.c t1_lib.c t1_enc.c ssl_lib.c ssl_err2.c ssl_cert.c ssl_sess.c ssl_ciph.c ssl_stat.c ssl_rsa.c ssl_asn1.c ssl_txt.c ssl_algs.c bio_ssl.c ssl_err.c
 MAKE=make -f Makefile.ssl
 MAKEDEPEND=makedepend -f Makefile.ssl
 MAKEFILE=Makefile.ssl
-SRC=s2_meth.c s2_srvr.c s2_clnt.c s2_lib.c s2_pkt.c s2_enc.c s3_meth.c s3_srvr.c s3_clnt.c s3_lib.c s3_pkt.c s3_enc.c s3_both.c s23_meth.c s23_srvr.c s23_clnt.c s23_lib.c s23_pkt.c ssl_lib.c ssl_err2.c ssl_cert.c ssl_sess.c ssl_ciph.c ssl_stat.c ssl_rsa.c ssl_asn1.c ssl_txt.c ssl_algs.c bio_ssl.c ssl_err.c
+SRC=s2_meth.c s2_srvr.c s2_clnt.c s2_lib.c s2_enc.c s2_pkt.c s3_meth.c s3_srvr.c s3_clnt.c s3_lib.c s3_enc.c s3_pkt.c s3_both.c s23_meth.c s23_srvr.c s23_clnt.c s23_lib.c s23_pkt.c t1_meth.c t1_srvr.c t1_clnt.c t1_lib.c t1_enc.c ssl_lib.c ssl_err2.c ssl_cert.c ssl_sess.c ssl_ciph.c ssl_stat.c ssl_rsa.c ssl_asn1.c ssl_txt.c ssl_algs.c bio_ssl.c ssl_err.c
 TEST=ssltest.c
 TOP=..
 RELATIVE_DIRECTORY=
@@ -738,7 +871,7 @@ TEST=
 TOP=..
 RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=apps
-ALL=Makefile verify.c asn1pars.c req.c dgst.c dh.c enc.c gendh.c errstr.c ca.c gendsa.c pkcs7.c crl2p7.c crl.c rsa.c dsa.c dsaparam.c x509.c genrsa.c s_server.c s_client.c speed.c s_time.c apps.c s_cb.c s_socket.c version.c sess_id.c ciphers.c apps.h progs.h s_apps.h testdsa.h testrsa.h 
+ALL=Makefile verify.c asn1pars.c req.c dgst.c dh.c enc.c gendh.c errstr.c ca.c pkcs7.c crl2p7.c crl.c rsa.c dsa.c dsaparam.c x509.c genrsa.c s_server.c s_client.c speed.c s_time.c apps.c s_cb.c s_socket.c version.c sess_id.c ciphers.c apps.h progs.h s_apps.h testdsa.h testrsa.h 
 A_OBJ=apps.o
 A_SRC=apps.c
 CC=cc
@@ -750,9 +883,9 @@ DLIBSSL=../libssl.a
 EXE=ssleay
 EXHEADER=
 EX_LIBS=
-E_EXE=verify asn1pars req dgst dh enc gendh gendsa errstr ca crl rsa dsa dsaparam x509 genrsa s_server s_client speed s_time version pkcs7 crl2pkcs7 sess_id ciphers
-E_OBJ=verify.o asn1pars.o req.o dgst.o dh.o enc.o gendh.o errstr.o ca.o gendsa.o pkcs7.o crl2p7.o crl.o rsa.o dsa.o dsaparam.o x509.o genrsa.o s_server.o s_client.o speed.o s_time.o apps.o s_cb.o s_socket.o version.o sess_id.o ciphers.o
-E_SRC=verify.c asn1pars.c req.c dgst.c dh.c enc.c gendh.c errstr.c ca.c gendsa.c pkcs7.c crl2p7.c crl.c rsa.c dsa.c dsaparam.c x509.c genrsa.c s_server.c s_client.c speed.c s_time.c apps.c s_cb.c s_socket.c version.c sess_id.c ciphers.c
+E_EXE=verify asn1pars req dgst dh enc gendh errstr ca crl rsa dsa dsaparam x509 genrsa s_server s_client speed s_time version pkcs7 crl2pkcs7 sess_id ciphers
+E_OBJ=verify.o asn1pars.o req.o dgst.o dh.o enc.o gendh.o errstr.o ca.o pkcs7.o crl2p7.o crl.o rsa.o dsa.o dsaparam.o x509.o genrsa.o s_server.o s_client.o speed.o s_time.o apps.o s_cb.o s_socket.o version.o sess_id.o ciphers.o
+E_SRC=verify.c asn1pars.c req.c dgst.c dh.c enc.c gendh.c errstr.c ca.c pkcs7.c crl2p7.c crl.c rsa.c dsa.c dsaparam.c x509.c genrsa.c s_server.c s_client.c speed.c s_time.c apps.c s_cb.c s_socket.c version.c sess_id.c ciphers.c
 GENERAL=Makefile
 HEADER=apps.h progs.h s_apps.h testdsa.h testrsa.h 
 INCLUDES=-I../include
@@ -766,16 +899,17 @@ PEX_LIBS=
 PROGS=ssleay.c
 RM=/bin/rm -f
 SCRIPTS=CA.sh der_chop
-SRC=verify.c asn1pars.c req.c dgst.c dh.c enc.c gendh.c errstr.c ca.c gendsa.c pkcs7.c crl2p7.c crl.c rsa.c dsa.c dsaparam.c x509.c genrsa.c s_server.c s_client.c speed.c s_time.c apps.c s_cb.c s_socket.c version.c sess_id.c ciphers.c
+SRC=verify.c asn1pars.c req.c dgst.c dh.c enc.c gendh.c errstr.c ca.c pkcs7.c crl2p7.c crl.c rsa.c dsa.c dsaparam.c x509.c genrsa.c s_server.c s_client.c speed.c s_time.c apps.c s_cb.c s_socket.c version.c sess_id.c ciphers.c
 SSLEAY=ssleay
 S_OBJ=s_cb.o s_socket.o
 S_SRC=s_cb.c s_socket.c
 TOP=..
 RELATIVE_DIRECTORY=
 RELATIVE_DIRECTORY=test
-ALL=Makefile.ssl bntest.c ideatest.c md2test.c md5test.c rc4test.c destest.c shatest.c sha1test.c mdc2test.c randtest.c dhtest.c rc2test.c bftest.c ssltest.c dsatest.c exptest.c 
+ALL=Makefile.ssl bntest.c ideatest.c md2test.c md5test.c hmactest.c rc2test.c rc4test.c rc5test.c destest.c shatest.c sha1test.c mdc2test.c rmdtest.c randtest.c dhtest.c casttest.c bftest.c ssltest.c dsatest.c exptest.c 
 BFTEST=bftest
 BNTEST=bntest
+CASTTEST=casttest
 CC=cc
 CFLAG=-g
 CFLAGS=-I../include -g
@@ -785,12 +919,13 @@ DIR=test
 DLIBCRYPTO=../libcrypto.a
 DLIBSSL=../libssl.a
 DSATEST=dsatest
-EXE=bntest ideatest md2test md5test rc4test destest shatest sha1test mdc2test randtest dhtest rc2test bftest ssltest exptest dsatest
+EXE=bntest ideatest md2test md5test hmactest rc2test rc4test rc5test destest shatest sha1test mdc2test rmdtest randtest dhtest bftest casttest ssltest exptest dsatest
 EXHEADER=
 EXPTEST=exptest
-EX_LIBS=-lnsl -lsocket
+EX_LIBS=
 GENERAL=Makefile.ssl
 HEADER=
+HMACTEST=hmactest
 IDEATEST=ideatest
 INCLUDES=-I../include
 INSTALLTOP=/usr/local/ssl
@@ -803,14 +938,16 @@ MD2TEST=md2test
 MD5TEST=md5test
 MDC2TEST=mdc2test
 METHTEST=methtest
-OBJ=bntest.o ideatest.o md2test.o md5test.o rc4test.o destest.o shatest.o sha1test.o mdc2test.o randtest.o dhtest.o rc2test.o bftest.o ssltest.o dsatest.o exptest.o
+OBJ=bntest.o ideatest.o md2test.o md5test.o hmactest.o rc2test.o rc4test.o rc5test.o destest.o shatest.o sha1test.o mdc2test.o rmdtest.o randtest.o dhtest.o casttest.o bftest.o ssltest.o dsatest.o exptest.o
 PEX_LIBS=
 RANDTEST=randtest
 RC2TEST=rc2test
 RC4TEST=rc4test
+RC5TEST=rc5test
+RMDTEST=rmdtest
 SHA1TEST=sha1test
 SHATEST=shatest
-SRC=bntest.c ideatest.c md2test.c md5test.c rc4test.c destest.c shatest.c sha1test.c mdc2test.c randtest.c dhtest.c rc2test.c bftest.c ssltest.c dsatest.c exptest.c
+SRC=bntest.c ideatest.c md2test.c md5test.c hmactest.c rc2test.c rc4test.c rc5test.c destest.c shatest.c sha1test.c mdc2test.c rmdtest.c randtest.c dhtest.c casttest.c bftest.c ssltest.c dsatest.c exptest.c
 SSLTEST=ssltest
 TOP=..
 RELATIVE_DIRECTORY=

Makefile.ssl

@@ -1,6 +1,6 @@
 #
 # Makefile for all the SSL related library routines and utilities
-VERSION	= 0.8.1a
+VERSION = 0.9.0a
 #
 # make install will install:
 #   libraries into $INSTALLTOP/lib
@@ -21,9 +21,9 @@ VERSION	= 0.8.1a
 #
 # If you must get hold of people directly (we much prefer the above
 # lists to be used if the question is of general interest!):
-#	Eric Young <eay@cryptsoft.com>
-#	Tim Hudson <tjh@cryptsoft.com>
-#	or both    <ssleay@cryptsoft.com>
+#       Eric Young <eay@cryptsoft.com>
+#       Tim Hudson <tjh@cryptsoft.com>
+#       or both    <ssleay@cryptsoft.com>
 #
 # The primary distribution of SSLeay is from
 # ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL
@@ -35,71 +35,124 @@ VERSION	= 0.8.1a
 # NO_RC4  - Define to build without the RC4 algorithm
 # NO_RC2  - Define to build without the RC2 algorithm
 # THREADS - Define when building with threads, you will probably also need any
-#	    system defines as well, i.e. _REENTERANT for Solaris 2.[34]
+#           system defines as well, i.e. _REENTERANT for Solaris 2.[34]
 # TERMIO  - Define the termio terminal subsystem, needed if sgtty is missing.
 # TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
 # LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
 # DEVRANDOM - Give this the value of the 'random device' if your OS supports
-#	    one.  32 bytes will be read from this when the random
-#	    number generator is initalised.
+#           one.  32 bytes will be read from this when the random
+#           number generator is initalised.
 # SSL_ALLOW_ADH - define if you want the server to be able to use the
-#	    SSLv3 anon-DH ciphers.
+#           SSLv3 anon-DH ciphers.
 # SSL_ALLOW_ENULL - define if you want the server to be able to use the
-#	    NULL encryption ciphers.
+#           NULL encryption ciphers.
 #
 # LOCK_DEBUG - turns on lots of lock debug output :-)
 # REF_CHECK - turn on some xyz_free() assertions.
+# REF_PRINT - prints some stuff on structure free.
 # CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
 # MFUNC - Make all Malloc/Free/Realloc calls call
-#	CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
-#	call application defined callbacks via CRYPTO_set_mem_functions()
+#       CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
+#       call application defined callbacks via CRYPTO_set_mem_functions()
+# MD5_ASM needs to be defined to use the x86 assembler for MD5
+# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
+# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
 
 
 CC= cc
+#CFLAG= -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized -DMD5_ASM -DSHA1_ASM -DRMD160_ASM
 CFLAG= -O -DNOPROTO
-#CFLAG= -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall -Wuninitialized
 PEX_LIBS= -L. -L.. -L../.. -L../../..
 EX_LIBS= 
-#EX_LIBS= #-lRSAglue -lrsaref -lnsl -lsocket
 AR=ar r
 
 # Set BN_MULW to bn_mulw.o if you want to use the C version
-#BN_MULW= asm/x86-lnx.o
 BN_MULW= bn_mulw.o
-#BN_MULW= asm/x86-lnx.o		# elf
-#BN_MULW= asm/x86-sol.o		# solaris
-#BN_MULW= asm/x86-lnxa.o	# a.out, FreeBSD
-#BN_MULW= asm/x86-bsdi.o	# bsdi
-#BN_MULW= asm/alpha.o		# DEC Alpha
-#BN_MULW= asm/pa-risc2.o	# HP-UX PA-RISC
-#BN_MULW= asm/r3000.o		# SGI MIPS cpu
-#BN_MULW= asm/sparc.o		# Sun solaris/SunOS
-#BN_MULW= asm/x86nt32.o		# Windows 95/NT
-#BN_MULW= asm/x86w16.o		# 16 bit code for Windows 3.1/DOS
-#BN_MULW= asm/x86w32.o		# 32 bit code for Windows 3.1
+#BN_MULW= bn_mulw.o
+#BN_MULW= asm/bn86-elf.o        # elf, linux-elf
+#BN_MULW= asm/bn86-sol.o        # solaris
+#BN_MULW= asm/bn86-out.o        # a.out, FreeBSD
+#BN_MULW= asm/bn86bsdi.o        # bsdi
+#BN_MULW= asm/alpha.o           # DEC Alpha
+#BN_MULW= asm/pa-risc2.o        # HP-UX PA-RISC
+#BN_MULW= asm/r3000.o           # SGI MIPS cpu
+#BN_MULW= asm/sparc.o           # Sun solaris/SunOS
+#BN_MULW= asm/bn-win32.o                # Windows 95/NT
+#BN_MULW= asm/x86w16.o          # 16 bit code for Windows 3.1/DOS
+#BN_MULW= asm/x86w32.o          # 32 bit code for Windows 3.1
 
 # Set DES_ENC to des_enc.o if you want to use the C version
 #There are 4 x86 assember options.
 DES_ENC= des_enc.o fcrypt_b.o
-#DES_ENC= des_enc.o fcrypt_b.o		# C
-#DES_ENC= asm/dx86-elf.o asm/cx86-elf.o # elf
-#DES_ENC= asm/dx86-sol.o asm/cx86-sol.o	# solaris
-#DES_ENC= asm/dx86-out.o asm/cx86-out.o	# a.out, FreeBSD
-#DES_ENC= asm/dx86bsdi.o asm/cx86bsdi.o	# bsdi
+#DES_ENC= des_enc.o fcrypt_b.o          # C
+#DES_ENC= asm/dx86-elf.o asm/yx86-elf.o # elf
+#DES_ENC= asm/dx86-sol.o asm/yx86-sol.o # solaris
+#DES_ENC= asm/dx86-out.o asm/yx86-out.o # a.out, FreeBSD
+#DES_ENC= asm/dx86bsdi.o asm/yx86bsdi.o # bsdi
 
 # Set BF_ENC to bf_enc.o if you want to use the C version
 #There are 4 x86 assember options.
 BF_ENC= bf_enc.o
-#BF_ENC= bf_enc.o	# C
+#BF_ENC= bf_enc.o
 #BF_ENC= asm/bx86-elf.o # elf
-#BF_ENC= asm/bx86-sol.o	# solaris
-#BF_ENC= asm/bx86-out.o	# a.out, FreeBSD
-#BF_ENC= asm/bx86bsdi.o	# bsdi
+#BF_ENC= asm/bx86-sol.o # solaris
+#BF_ENC= asm/bx86-out.o # a.out, FreeBSD
+#BF_ENC= asm/bx86bsdi.o # bsdi
 
-DIRS=	crypto ssl rsaref apps test tools
+# Set CAST_ENC to c_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+CAST_ENC= c_enc.o
+#CAST_ENC= c_enc.o
+#CAST_ENC= asm/cx86-elf.o # elf
+#CAST_ENC= asm/cx86-sol.o # solaris
+#CAST_ENC= asm/cx86-out.o # a.out, FreeBSD
+#CAST_ENC= asm/cx86bsdi.o # bsdi
+
+# Set RC4_ENC to rc4_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+RC4_ENC= rc4_enc.o
+#RC4_ENC= rc4_enc.o
+#RC4_ENC= asm/rx86-elf.o # elf
+#RC4_ENC= asm/rx86-sol.o # solaris
+#RC4_ENC= asm/rx86-out.o # a.out, FreeBSD
+#RC4_ENC= asm/rx86bsdi.o # bsdi
+
+# Set RC5_ENC to rc5_enc.o if you want to use the C version
+#There are 4 x86 assember options.
+RC5_ENC= rc5_enc.o
+#RC5_ENC= rc5_enc.o
+#RC5_ENC= asm/r586-elf.o # elf
+#RC5_ENC= asm/r586-sol.o # solaris
+#RC5_ENC= asm/r586-out.o # a.out, FreeBSD
+#RC5_ENC= asm/r586bsdi.o # bsdi
+
+# Also need MD5_ASM defined
+MD5_ASM_OBJ= 
+#MD5_ASM_OBJ= asm/mx86-elf.o        # elf
+#MD5_ASM_OBJ= asm/mx86-sol.o        # solaris
+#MD5_ASM_OBJ= asm/mx86-out.o        # a.out, FreeBSD
+#MD5_ASM_OBJ= asm/mx86bsdi.o        # bsdi
+
+# Also need SHA1_ASM defined
+SHA1_ASM_OBJ= 
+#SHA1_ASM_OBJ= asm/sx86-elf.o       # elf
+#SHA1_ASM_OBJ= asm/sx86-sol.o       # solaris
+#SHA1_ASM_OBJ= asm/sx86-out.o       # a.out, FreeBSD
+#SHA1_ASM_OBJ= asm/sx86bsdi.o       # bsdi
+
+# Also need RMD160_ASM defined
+RMD160_ASM_OBJ= 
+#RMD160_ASM_OBJ= asm/rm86-elf.o       # elf
+#RMD160_ASM_OBJ= asm/rm86-sol.o       # solaris
+#RMD160_ASM_OBJ= asm/rm86-out.o       # a.out, FreeBSD
+#RMD160_ASM_OBJ= asm/rm86bsdi.o       # bsdi
+
+DIRS=   crypto ssl rsaref apps test tools
 # dirs in crypto to build
 SDIRS=  \
-	md sha mdc2 des rc4 rc2 idea bf bn rsa dsa dh \
+	md2 md5 sha mdc2 hmac ripemd \
+	des rc2 rc4 rc5 idea bf cast \
+	bn rsa dsa dh \
 	buffer bio stack lhash rand err objects \
 	evp pem asn1 x509 conf txt_db pkcs7
 
@@ -108,46 +161,46 @@ SDIRS=  \
 INSTALLTOP=/usr/local/ssl
 
 MAKEFILE= Makefile.ssl
-MAKE=	  make -f Makefile.ssl
+MAKE=     make -f Makefile.ssl
 
 MAN1=1
 MAN3=3
 SHELL=/bin/sh
 
-TOP=	.
+TOP=    .
 ONEDIRS=out tmp
-EDIRS=	times doc bugs util include certs ms shlib mt demos
-MISC=	COPYRIGHT Configure HISTORY.066 INSTALL Makefile.ssl Makefile \
-	README TODO HISTORY README.066 README.080 \
+EDIRS=  times doc bugs util include certs ms shlib mt demos perl dep
+MISC=   COPYRIGHT Configure HISTORY.066 INSTALL Makefile.ssl Makefile \
+	README TODO HISTORY README.066 README.080 README.090 \
 	VERSION PROBLEMS MINFO makefile.one e_os.h \
-	MICROSOFT makevms.com
-WDIRS=	windows
-LIBS=	libcrypto.a libssl.a 
-
-GENERAL=	Makefile
-BASENAME=	SSLeay
-NAME=		$(BASENAME)-$(VERSION)
-TARFILE=	$(NAME).tar
-WTARFILE=	$(NAME)-win.tar
-EX_HEADER=
-HEADER=		e_os.h
+	MICROSOFT makevms.com config PATENTS
+WDIRS=  windows
+LIBS=   libcrypto.a libssl.a 
+
+GENERAL=        Makefile
+BASENAME=       SSLeay
+NAME=           $(BASENAME)-$(VERSION)
+TARFILE=        $(NAME).tar
+WTARFILE=       $(NAME)-win.tar
+EXHEADER=       e_os.h
+HEADER=         e_os.h
 
 all:
 	@for i in $(DIRS) ;\
 	do \
 	(cd $$i; echo "making $$i..."; \
-	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_MULW='${BN_MULW}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' SDIRS='${SDIRS}' AR='${AR}' all ); \
+	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_MULW='${BN_MULW}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' SDIRS='${SDIRS}' AR='${AR}' all ); \
 	done;
 
 sub_all:
 	@for i in $(DIRS) ;\
 	do \
 	(cd $$i; echo "making $$i..."; \
-	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_MULW='${BN_MULW}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' AR='${AR}' all ); \
+	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' SDIRS='$(SDIRS)' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_MULW='${BN_MULW}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' all ); \
 	done;
 
 clean:
-	/bin/rm -f *.o core a.out fluff *.map
+	/bin/rm -f shlib/*.o *.o core a.out fluff *.map
 	@for i in $(DIRS) ;\
 	do \
 	(cd $$i; echo "cleaning $$i..."; \
@@ -158,14 +211,14 @@ clean:
 	/bin/rm -f $(TARFILE)
 	@for i in $(ONEDIRS) ;\
 	do \
-	/bin/rm -f $$i/*; \
+	/bin/rm -fr $$i/*; \
 	done
 
 makefile.one: files
 	perl util/mk1mf.pl >makefile.one; \
 	sh util/do_ms.sh
 
-files:	MINFO
+files:  MINFO
 	perl $(TOP)/util/files.pl Makefile.ssl > $(TOP)/MINFO
 	@for i in $(DIRS) ;\
 	do \
@@ -176,13 +229,14 @@ files:	MINFO
 links:
 	/bin/rm -f Makefile;
 	./util/point.sh Makefile.ssl Makefile;
+	$(TOP)/util/mklink.sh include $(EXHEADER) ;
 	@for i in $(DIRS) ;\
 	do \
 	(cd $$i; echo "making links in $$i..."; \
 	$(MAKE) SDIRS='${SDIRS}' links ); \
 	done;
 	# @(cd apps; sh ./mklinks)
-	sh tools/c_rehash certs
+	@( SSLEAY="`pwd`/apps/ssleay"; export SSLEAY; sh tools/c_rehash certs )
 
 dclean:
 	/bin/rm -f *.bak
@@ -195,11 +249,11 @@ dclean:
 rehash:
 	@(PATH="`pwd`/apps:${PATH}"; sh tools/c_rehash certs)
 
-test:	tests
+test:   tests
 
 tests:
 	(cd test; echo "testing $$i..."; \
-	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_MULW='${BN_MULW}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' SDIRS='${SDIRS}' AR='${AR}' tests );
+	$(MAKE) CC='${CC}' CFLAG='${CFLAG}' INSTALLTOP='${INSTALLTOP}' PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' BN_MULW='${BN_MULW}' DES_ENC='${DES_ENC}' BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' SDIRS='${SDIRS}' SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' MD5_ASM_OBJ='${MD5_ASM_OBJ}' RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' AR='${AR}' tests );
 	@apps/ssleay version -a
 
 depend:
@@ -242,8 +296,9 @@ tar:
 	mv $(NAME) $(BASENAME) ) 
 	gzip -f $(TARFILE)
 
-dist:	
+dist:   
 	perl Configure dist
+	perl util/up_ver.pl ${VERSION}
 	@$(MAKE) dist_pem_h
 	@$(MAKE) SDIRS='${SDIRS}' clean
 	@$(MAKE) SDIRS='${SDIRS}' dclean
@@ -267,7 +322,7 @@ install: all
 	done
 	@for i in $(LIBS) ;\
 	do \
-	(	echo installing $$i; \
+	(       echo installing $$i; \
 		cp $$i $(INSTALLTOP)/lib; \
 		sh util/ranlib.sh $(INSTALLTOP)/lib/$$i; \
 		chmod 644 $(INSTALLTOP)/lib/$$i ); \

PATENTS

@@ -0,0 +1,9 @@
+RSA Data Security holds software patents on the RSA and RC5 algorithms.
+If there ciphers are used used inside the USA (and Japan?), you must contact
+RSA Data Security for licencing conditions.
+
+The IDEA algorithm is patented by XXXX and they should be contacted if that
+algorithm is to be used.
+
+RC4 is a trademark of RSA Data Security, so use of this label should perhaps
+only me used with RSA Data Security's permission.

README

@@ -1,4 +1,4 @@
-		SSLeay 0.8.1b 29-Jun-1998
+		SSLeay 0.9.0b 29-Jun-1998
 		Copyright (c) 1997, Eric Young
 		All rights reserved.
 

README.090

@@ -0,0 +1,71 @@
+10-Apr-1998
+I said the next version would go out at easter, and so it shall.
+I expect a 0.9.1 will follow with portability fixes in the next few weeks.
+
+This is a quick, meet the deadline.  Look to ssl-users for comments on what
+is new etc.
+
+The state of play
+- TLSv1 - I need to do some explaining about how the methods interact.
+  The bad news is that SSLeay 0.8.x application will not roll back to
+  SSLv3, I suffed up.  0.8.x is rather pedantic about the '3.0' version
+  number.  Look at the 'no-tls' options in applications in the apps directory.
+- The perl5 stuff is very rough.  The SSL part does not work due to
+  reference count hassles in the BIO stuff.  I just have not had time to
+  look at it.  The cipher, digest and bignum stuff works though.  I just
+  need to clean up the API.
+- Lots of x86 assember.  I now have it for des, 3des, rc4, rc5, blowfish,
+  cast, md5, sha1 and ripemd160.  It has been tested on win32, linux (elf)
+  and FreeBSD (a.out).
+- As mentioned above, cast, rc5 and ripemd160 have been added.
+- A simple HMAC set of functions.
+- EX_DATA strucutre, which can be used by applications or other libraries
+  to tack arbitarty data against strucutures that include it.
+  You will probably have to see examples to see how to use it, and I will
+  elaberate on the ssl-users mailing list
+- RSA blinding.  If you fear timing attacks on RSA, you can turn on
+  blinding which defeats it.
+- From Tim Hudson, try running 'sh config' instead of 'perl Configure'.
+  I makes an educated guess as to what you are and then runs 'perl Configure'
+- The error stuff has been modified so arbitary strings can be taged
+  against an error message.  It is used in a few places to elaberate on
+  parameters that caused the error.
+
+Areas of work
+- The 16bit big-num assember needs a routine added.  The WIN16 and
+  WIN32 stuff is ok, but MS-DOS or 286 builds need the update.
+- Most of the bignum assember will not work.  There will be a function
+  missing, bn_add_words().  I need people to send me the C compiler output
+  for platforms I don't already have.  Currently, the assember is correct for
+  x86, win32, win16(386+), linux elf, FreeBSD a.out and sparc.
+- PKCS7, I have delusions of s/MIME.  I need to do a BIO interface.
+- perl5, it needs finishing
+- X509v3 extension.  I have some ideas, I just need to
+  implement them :-)
+- Public key methods.  I need to clean up the library internally so
+  public key methods are loaded is a similar way to symetric ciphers
+  and digests.  I also need to seperate out the digests from public
+  key methods.  This stuff is needed to support sortware patents, smaller
+  code size and hardware tokens.
+
+Anyway, this release gets out the bug fixes and TLS, but be warned, until
+all those old SSLeay 0.8.x based server get upgraded, you will need to
+connect with SSLv3 if TLSv1 fails.
+
+eric (about to go bushwalking for the 4 day easter break :-)
+
+PS Common problems
+- For Win32 build, use /MD to specify your libraries, or build SSLeay with
+  the same flags as your application.  Visual C stuffs up the malloc routines
+  if memory allocated by one memory model is freed by another.  FILE pointers
+  are a major cause of these problem.
+- If you are trying to use non-blocking IO and it is not working,
+  try 'ssleay s_client -help' and see if the -nbio option is listed.
+  For unixware, it has the non-block IO define in 'differnt' header file
+  and SSLeay will silently build without non-blocking IO calls (but for
+  unixware, the special header has been included).
+- -DL_ENDIAN.  For the message digests, some code needs to be turned off
+  in the C code when assember is used.  For x86, this means the L_ENDIAN
+  needs to defined when x86 -DSHA1_ASM is defined.  The reasons this is
+  not automagically done is because non-x86 assember could be bigendian.
+  For pure C code builds, the B_ENDIAN/L_ENDIAN flags are optional.

apps/Makefile.ssl

@@ -31,7 +31,7 @@ SCRIPTS=CA.sh der_chop
 
 EXE= $(SSLEAY)
 
-E_EXE=	verify asn1pars req dgst dh enc gendh gendsa errstr ca crl \
+E_EXE=	verify asn1pars req dgst dh enc gendh errstr ca crl \
 	rsa dsa dsaparam \
 	x509 genrsa s_server s_client speed \
 	s_time version pkcs7 crl2pkcs7 sess_id ciphers
@@ -44,7 +44,7 @@ S_OBJ=	s_cb.o s_socket.o
 S_SRC=	s_cb.c s_socket.c
 
 E_OBJ=	verify.o asn1pars.o req.o dgst.o dh.o enc.o gendh.o errstr.o ca.o \
-	gendsa.o pkcs7.o crl2p7.o crl.o \
+	pkcs7.o crl2p7.o crl.o \
 	rsa.o dsa.o dsaparam.o \
 	x509.o genrsa.o s_server.o s_client.o speed.o \
 	s_time.o $(A_OBJ) $(S_OBJ) version.o sess_id.o \
@@ -53,7 +53,7 @@ E_OBJ=	verify.o asn1pars.o req.o dgst.o dh.o enc.o gendh.o errstr.o ca.o \
 #	pem_mail.o
 
 E_SRC=	verify.c asn1pars.c req.c dgst.c dh.c enc.c gendh.c errstr.c ca.c \
-	gendsa.c pkcs7.c crl2p7.c crl.c \
+	pkcs7.c crl2p7.c crl.c \
 	rsa.c dsa.c dsaparam.c \
 	x509.c genrsa.c s_server.c s_client.c speed.c \
 	s_time.c $(A_SRC) $(S_SRC) version.c sess_id.c \

apps/apps.c

@@ -1,5 +1,5 @@
 /* apps/apps.c */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  * All rights reserved.
  *
  * This package is an SSL implementation written
@@ -65,13 +65,8 @@
 #include "apps.h"
 #undef NON_MAIN
 
-#ifdef WIN16
-#define APPS_WIN16
-#ifdef FLAT_BUILD
-#include "bss_file.c"
-#else
-#include "../crypto/bio/bss_file.c"
-#endif
+#ifdef WINDOWS
+#  include "bss_file.c"
 #endif
 
 #ifndef NOPROTO

apps/apps.h

@@ -1,5 +1,5 @@
 /* apps/apps.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  * All rights reserved.
  *
  * This package is an SSL implementation written
@@ -59,18 +59,14 @@
 #ifndef HEADER_APPS_H
 #define HEADER_APPS_H
 
-#ifdef FLAT_INC
 #include "e_os.h"
-#else
-#include "../e_os.h"
-#endif
 
 #include "buffer.h"
 #include "bio.h"
 #include "crypto.h"
 #include "progs.h"
 
-#ifdef WIN16
+#ifdef NO_STDIO
 BIO_METHOD *BIO_s_file();
 #endif
 

apps/asn1pars.c

@@ -1,5 +1,5 @@
 /* apps/asn1pars.c */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
  * All rights reserved.
  *
  * This package is an SSL implementation written
@@ -75,6 +75,7 @@
  * -i		- indent the details by depth
  * -offset	- where in the file to start