Browse Source

MIPS64 assembly pack: add Poly1305 module.

Reviewed-by: Richard Levitte <levitte@openssl.org>
master
Andy Polyakov 6 years ago
parent
commit
c6b77c16a6
2 changed files with 415 additions and 0 deletions
  1. +414
    -0
      crypto/poly1305/asm/poly1305-mips.pl
  2. +1
    -0
      crypto/poly1305/build.info

+ 414
- 0
crypto/poly1305/asm/poly1305-mips.pl View File

@ -0,0 +1,414 @@
#!/usr/bin/env perl
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
# Poly1305 hash for MIPS64.
#
# May 2016
#
# Numbers are cycles per processed byte with poly1305_blocks alone.
#
# IALU/gcc
# R1x000 5.64/+120% (big-endian)
# Octeon II 3.80/+280% (little-endian)
######################################################################
# There is a number of MIPS ABI in use, O32 and N32/64 are most
# widely used. Then there is a new contender: NUBI. It appears that if
# one picks the latter, it's possible to arrange code in ABI neutral
# manner. Therefore let's stick to NUBI register layout:
#
($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25));
($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23));
($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31));
#
# The return value is placed in $a0. Following coding rules facilitate
# interoperability:
#
# - never ever touch $tp, "thread pointer", former $gp [o32 can be
# excluded from the rule, because it's specified volatile];
# - copy return value to $t0, former $v0 [or to $a0 if you're adapting
# old code];
# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary;
#
# For reference here is register layout for N32/64 MIPS ABIs:
#
# ($zero,$at,$v0,$v1)=map("\$$_",(0..3));
# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
#
# <appro@openssl.org>
#
######################################################################
$flavour = shift || "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
die "MIPS64 only" unless ($flavour =~ /64|n32/i);
$v0 = ($flavour =~ /nubi/i) ? $a0 : $t0;
$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0x0003f000" : "0x00030000";
($ctx,$inp,$len,$padbit) = ($a0,$a1,$a2,$a3);
($in0,$in1,$tmp0,$tmp1,$tmp2,$tmp3,$tmp4) = ($a4,$a5,$a6,$a7,$at,$t0,$t1);
$code.=<<___;
#ifdef MIPSEB
# define MSB 0
# define LSB 7
#else
# define MSB 7
# define LSB 0
#endif
.text
.set noat
.set noreorder
.align 5
.globl poly1305_init
.ent poly1305_init
poly1305_init:
.frame $sp,0,$ra
.set reorder
sd $zero,0($ctx)
sd $zero,8($ctx)
sd $zero,16($ctx)
beqz $inp,.Lno_key
ldl $in0,0+MSB($inp)
ldl $in1,8+MSB($inp)
ldr $in0,0+LSB($inp)
ldr $in1,8+LSB($inp)
#ifdef MIPSEB
# if defined(_MIPS_ARCH_MIPS64R2)
dsbh $in0,$in0 # byte swap
dsbh $in1,$in1
dshd $in0,$in0
dshd $in1,$in1
# else
ori $tmp0,$zero,0xFF
dsll $tmp2,$tmp0,32
or $tmp0,$tmp2 # 0x000000FF000000FF
and $tmp1,$in0,$tmp0 # byte swap
and $tmp3,$in1,$tmp0
dsrl $tmp2,$in0,24
dsrl $tmp4,$in1,24
dsll $tmp1,24
dsll $tmp3,24
and $tmp2,$tmp0
and $tmp4,$tmp0
dsll $tmp0,8 # 0x0000FF000000FF00
or $tmp1,$tmp2
or $tmp3,$tmp4
and $tmp2,$in0,$tmp0
and $tmp4,$in1,$tmp0
dsrl $in0,8
dsrl $in1,8
dsll $tmp2,8
dsll $tmp4,8
and $in0,$tmp0
and $in1,$tmp0
or $tmp1,$tmp2
or $tmp3,$tmp4
or $in0,$tmp1
or $in1,$tmp3
dsrl $tmp1,$in0,32
dsrl $tmp3,$in1,32
dsll $in0,32
dsll $in1,32
or $in0,$tmp1
or $in1,$tmp3
# endif
#endif
li $tmp0,1
dsll $tmp0,32
daddiu $tmp0,-63
dsll $tmp0,28
daddiu $tmp0,-1 # 0ffffffc0fffffff
and $in0,$tmp0
daddiu $tmp0,-3 # 0ffffffc0ffffffc
and $in1,$tmp0
sd $in0,24($ctx)
dsrl $tmp0,$in1,2
sd $in1,32($ctx)
daddu $tmp0,$in1 # s1 = r1 + (r1 >> 2)
sd $tmp0,40($ctx)
.Lno_key:
li $v0,0 # return 0
jr $ra
.end poly1305_init
___
{
my ($h0,$h1,$h2,$r0,$r1,$s1,$d0,$d1,$d2) =
($s0,$s1,$s2,$s3,$s4,$s5,$in0,$in1,$t2);
$code.=<<___;
.align 5
.globl poly1305_blocks
.ent poly1305_blocks
poly1305_blocks:
.set noreorder
dsrl $len,4 # number of complete blocks
beqz $len,.Lno_data
nop
.frame $sp,8*8,$ra
.mask $SAVED_REGS_MASK,-8
dsub $sp,8*8
sd $s5,0($sp)
sd $s4,8($sp)
___
$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi prologue
sd $s3,16($sp)
sd $s2,24($sp)
sd $s1,32($sp)
sd $s0,40($sp)
___
$code.=<<___;
.set reorder
ld $h0,0($ctx) # load hash value
ld $h1,8($ctx)
ld $h2,16($ctx)
ld $r0,24($ctx) # load key
ld $r1,32($ctx)
ld $s1,40($ctx)
.Loop:
ldl $in0,0+MSB($inp) # load input
ldl $in1,8+MSB($inp)
ldr $in0,0+LSB($inp)
daddiu $len,-1
ldr $in1,8+LSB($inp)
daddiu $inp,16
#ifdef MIPSEB
# if defined(_MIPS_ARCH_MIPS64R2)
dsbh $in0,$in0 # byte swap
dsbh $in1,$in1
dshd $in0,$in0
dshd $in1,$in1
# else
ori $tmp0,$zero,0xFF
dsll $tmp2,$tmp0,32
or $tmp0,$tmp2 # 0x000000FF000000FF
and $tmp1,$in0,$tmp0 # byte swap
and $tmp3,$in1,$tmp0
dsrl $tmp2,$in0,24
dsrl $tmp4,$in1,24
dsll $tmp1,24
dsll $tmp3,24
and $tmp2,$tmp0
and $tmp4,$tmp0
dsll $tmp0,8 # 0x0000FF000000FF00
or $tmp1,$tmp2
or $tmp3,$tmp4
and $tmp2,$in0,$tmp0
and $tmp4,$in1,$tmp0
dsrl $in0,8
dsrl $in1,8
dsll $tmp2,8
dsll $tmp4,8
and $in0,$tmp0
and $in1,$tmp0
or $tmp1,$tmp2
or $tmp3,$tmp4
or $in0,$tmp1
or $in1,$tmp3
dsrl $tmp1,$in0,32
dsrl $tmp3,$in1,32
dsll $in0,32
dsll $in1,32
or $in0,$tmp1
or $in1,$tmp3
# endif
#endif
daddu $h0,$in0 # accumulate input
daddu $h1,$in1
sltu $tmp0,$h0,$in0
sltu $tmp1,$h1,$in1
daddu $h1,$tmp0
dmultu $r0,$h0 # h0*r0
daddu $h2,$padbit
sltu $tmp0,$h1,$tmp0
mflo $d0
mfhi $d1
dmultu $s1,$h1 # h1*5*r1
daddu $tmp0,$tmp1
daddu $h2,$tmp0
mflo $tmp0
mfhi $tmp1
dmultu $r1,$h0 # h0*r1
daddu $d0,$tmp0
daddu $d1,$tmp1
mflo $tmp2
mfhi $d2
sltu $tmp0,$d0,$tmp0
daddu $d1,$tmp0
dmultu $r0,$h1 # h1*r0
daddu $d1,$tmp2
sltu $tmp2,$d1,$tmp2
mflo $tmp0
mfhi $tmp1
daddu $d2,$tmp2
dmultu $s1,$h2 # h2*5*r1
daddu $d1,$tmp0
daddu $d2,$tmp1
mflo $tmp2
dmultu $r0,$h2 # h2*r0
sltu $tmp0,$d1,$tmp0
daddu $d2,$tmp0
mflo $tmp3
daddu $d1,$tmp2
daddu $d2,$tmp3
sltu $tmp2,$d1,$tmp2
daddu $d2,$tmp2
li $tmp0,-4 # final reduction
and $tmp0,$d2
dsrl $tmp1,$d2,2
andi $h2,$d2,3
daddu $tmp0,$tmp1
daddu $h0,$d0,$tmp0
sltu $tmp0,$h0,$tmp0
daddu $h1,$d1,$tmp0
sltu $tmp0,$h1,$tmp0
daddu $h2,$h2,$tmp0
bnez $len,.Loop
sd $h0,0($ctx) # store hash value
sd $h1,8($ctx)
sd $h2,16($ctx)
.set noreorder
ld $s5,0($sp) # epilogue
ld $s4,8($sp)
___
$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi epilogue
ld $s3,16($sp)
ld $s2,24($sp)
ld $s1,32($sp)
ld $s0,40($sp)
___
$code.=<<___;
dadd $sp,8*8
.Lno_data:
jr $ra
nop
.end poly1305_blocks
___
}
{
my ($ctx,$mac,$nonce) = ($a0,$a1,$a2);
$code.=<<___;
.align 5
.globl poly1305_emit
.ent poly1305_emit
poly1305_emit:
.frame $sp,0,$ra
.set reorder
ld $tmp0,0($ctx)
ld $tmp1,8($ctx)
ld $tmp2,16($ctx)
daddiu $in0,$tmp0,5 # compare to modulus
sltiu $tmp3,$in0,5
daddu $in1,$tmp1,$tmp3
sltu $tmp3,$in1,$tmp3
daddu $tmp2,$tmp2,$tmp3
dsrl $tmp2,2 # see if it carried/borrowed
dsubu $tmp2,$zero,$tmp2
nor $tmp3,$zero,$tmp2
and $in0,$tmp2
and $tmp0,$tmp3
and $in1,$tmp2
and $tmp1,$tmp3
or $in0,$tmp0
or $in1,$tmp1
lwu $tmp0,0($nonce) # load nonce
lwu $tmp1,4($nonce)
lwu $tmp2,8($nonce)
lwu $tmp3,12($nonce)
dsll $tmp1,32
dsll $tmp3,32
or $tmp0,$tmp1
or $tmp2,$tmp3
daddu $in0,$tmp0 # accumulate nonce
daddu $in1,$tmp2
sltu $tmp0,$in0,$tmp0
daddu $in1,$tmp0
dsrl $tmp0,$in0,8 # write mac value
dsrl $tmp1,$in0,16
dsrl $tmp2,$in0,24
sb $in0,0($mac)
dsrl $tmp3,$in0,32
sb $tmp0,1($mac)
dsrl $tmp0,$in0,40
sb $tmp1,2($mac)
dsrl $tmp1,$in0,48
sb $tmp2,3($mac)
dsrl $tmp2,$in0,56
sb $tmp3,4($mac)
dsrl $tmp3,$in1,8
sb $tmp0,5($mac)
dsrl $tmp0,$in1,16
sb $tmp1,6($mac)
dsrl $tmp1,$in1,24
sb $tmp2,7($mac)
sb $in1,8($mac)
dsrl $tmp2,$in1,32
sb $tmp3,9($mac)
dsrl $tmp3,$in1,40
sb $tmp0,10($mac)
dsrl $tmp0,$in1,48
sb $tmp1,11($mac)
dsrl $tmp1,$in1,56
sb $tmp2,12($mac)
sb $tmp3,13($mac)
sb $tmp0,14($mac)
sb $tmp1,15($mac)
jr $ra
.end poly1305_emit
.rdata
.asciiz "Poly1305 for MIPS64, CRYPTOGAMS by <appro\@openssl.org>"
.align 2
___
}
$output=pop and open STDOUT,">$output";
print $code;
close STDOUT;

+ 1
- 0
crypto/poly1305/build.info View File

@ -12,6 +12,7 @@ GENERATE[poly1305-armv4.S]=asm/poly1305-armv4.pl $(PERLASM_SCHEME)
INCLUDE[poly1305-armv4.o]=..
GENERATE[poly1305-armv8.S]=asm/poly1305-armv8.pl $(PERLASM_SCHEME)
INCLUDE[poly1305-armv8.o]=..
GENERATE[poly1305-mips.S]=asm/poly1305-mips.pl $(PERLASM_SCHEME)
BEGINRAW[Makefile(unix)]
{- $builddir -}/poly1305-%.S: {- $sourcedir -}/asm/poly1305-%.pl


Loading…
Cancel
Save