MIPS assembly pack: fix MIPS64 assembler warnings.

Reviewed-by: Richard Levitte <levitte@openssl.org>

crypto/aes/asm/aes-mips.pl

@@ -57,6 +57,7 @@
 $flavour = shift || "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
 
 if ($flavour =~ /64|n32/i) {
+	$PTR_LA="dla";
 	$PTR_ADD="dadd";	# incidentally works even on n32
 	$PTR_SUB="dsub";	# incidentally works even on n32
 	$PTR_INS="dins";
@@ -65,6 +66,7 @@ if ($flavour =~ /64|n32/i) {
 	$PTR_SLL="dsll";	# incidentally works even on n32
 	$SZREG=8;
 } else {
+	$PTR_LA="la";
 	$PTR_ADD="add";
 	$PTR_SUB="sub";
 	$PTR_INS="ins";
@@ -110,7 +112,7 @@ ___
 
 {{{
 my $FRAMESIZE=16*$SZREG;
-my $SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? 0xc0fff008 : 0xc0ff0000;
+my $SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0xc0fff008" : "0xc0ff0000";
 
 my ($inp,$out,$key,$Tbl,$s0,$s1,$s2,$s3)=($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7);
 my ($i0,$i1,$i2,$i3)=($at,$t0,$t1,$t2);
@@ -646,7 +648,7 @@ $code.=<<___ if ($flavour !~ /o32/i);	# non-o32 PIC-ification
 ___
 $code.=<<___;
 	.set	reorder
-	la	$Tbl,AES_Te		# PIC-ified 'load address'
+	$PTR_LA	$Tbl,AES_Te		# PIC-ified 'load address'
 
 	lwl	$s0,0+$MSB($inp)
 	lwl	$s1,4+$MSB($inp)
@@ -1217,7 +1219,7 @@ $code.=<<___ if ($flavour !~ /o32/i);	# non-o32 PIC-ification
 ___
 $code.=<<___;
 	.set	reorder
-	la	$Tbl,AES_Td		# PIC-ified 'load address'
+	$PTR_LA	$Tbl,AES_Td		# PIC-ified 'load address'
 
 	lwl	$s0,0+$MSB($inp)
 	lwl	$s1,4+$MSB($inp)
@@ -1267,7 +1269,7 @@ ___
 
 {{{
 my $FRAMESIZE=8*$SZREG;
-my $SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? 0xc000f008 : 0xc0000000;
+my $SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0xc000f008" : "0xc0000000";
 
 my ($inp,$bits,$key,$Tbl)=($a0,$a1,$a2,$a3);
 my ($rk0,$rk1,$rk2,$rk3,$rk4,$rk5,$rk6,$rk7)=($a4,$a5,$a6,$a7,$s0,$s1,$s2,$s3);
@@ -1556,7 +1558,7 @@ $code.=<<___ if ($flavour !~ /o32/i);	# non-o32 PIC-ification
 ___
 $code.=<<___;
 	.set	reorder
-	la	$Tbl,AES_Te4		# PIC-ified 'load address'
+	$PTR_LA	$Tbl,AES_Te4		# PIC-ified 'load address'
 
 	bal	_mips_AES_set_encrypt_key
 
@@ -1611,7 +1613,7 @@ $code.=<<___ if ($flavour !~ /o32/i);	# non-o32 PIC-ification
 ___
 $code.=<<___;
 	.set	reorder
-	la	$Tbl,AES_Te4		# PIC-ified 'load address'
+	$PTR_LA	$Tbl,AES_Te4		# PIC-ified 'load address'
 
 	bal	_mips_AES_set_encrypt_key
 

crypto/sha/asm/sha1-mips.pl

@@ -326,7 +326,7 @@ ___
 }
 
 $FRAMESIZE=16;	# large enough to accommodate NUBI saved registers
-$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? 0xc0fff008 : 0xc0ff0000;
+$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0xc0fff008" : "0xc0ff0000";
 
 $code=<<___;
 #ifdef OPENSSL_FIPSCANISTER

crypto/sha/asm/sha512-mips.pl

@@ -52,6 +52,7 @@
 $flavour = shift || "o32"; # supported flavours are o32,n32,64,nubi32,nubi64
 
 if ($flavour =~ /64|n32/i) {
+	$PTR_LA="dla";
 	$PTR_ADD="dadd";	# incidentally works even on n32
 	$PTR_SUB="dsub";	# incidentally works even on n32
 	$REG_S="sd";
@@ -59,6 +60,7 @@ if ($flavour =~ /64|n32/i) {
 	$PTR_SLL="dsll";	# incidentally works even on n32
 	$SZREG=8;
 } else {
+	$PTR_LA="la";
 	$PTR_ADD="add";
 	$PTR_SUB="sub";
 	$REG_S="sw";
@@ -286,7 +288,7 @@ ___
 }
 
 $FRAMESIZE=16*$SZ+16*$SZREG;
-$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? 0xc0fff008 : 0xc0ff0000;
+$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0xc0fff008" : "0xc0ff0000";
 
 $code.=<<___;
 #ifdef OPENSSL_FIPSCANISTER
@@ -343,7 +345,7 @@ $code.=<<___ if ($flavour !~ /o32/i);	# non-o32 PIC-ification
 ___
 $code.=<<___;
 	.set	reorder
-	la	$Ktbl,K${label}		# PIC-ified 'load address'
+	$PTR_LA	$Ktbl,K${label}		# PIC-ified 'load address'
 
 	$LD	$A,0*$SZ($ctx)		# load context
 	$LD	$B,1*$SZ($ctx)