A local copy of OpenSSL from GitHub
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

270 lines
8.6 KiB

/*
* Copyright 2016 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the OpenSSL license (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
* in the file LICENSE in the source distribution or at
* https://www.openssl.org/source/license.html
*/
#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include "bio_lcl.h"
#include <openssl/err.h>
#ifndef OPENSSL_NO_SOCK
# ifdef SO_MAXCONN
# define MAX_LISTEN SO_MAXCONN
# elif defined(SOMAXCONN)
# define MAX_LISTEN SOMAXCONN
# else
# define MAX_LISTEN 32
# endif
/*-
* BIO_socket - create a socket
* @domain: the socket domain (AF_INET, AF_INET6, AF_UNIX, ...)
* @socktype: the socket type (SOCK_STEAM, SOCK_DGRAM)
* @protocol: the protocol to use (IPPROTO_TCP, IPPROTO_UDP)
* @options: BIO socket options (currently unused)
*
* Creates a socket. This should be called before calling any
* of BIO_connect and BIO_listen.
*
* Returns the file descriptor on success or INVALID_SOCKET on failure. On
* failure errno is set, and a status is added to the OpenSSL error stack.
*/
int BIO_socket(int domain, int socktype, int protocol, int options)
{
int sock = -1;
if (BIO_sock_init() != 1)
return INVALID_SOCKET;
sock = socket(domain, socktype, protocol);
if (sock == -1) {
SYSerr(SYS_F_SOCKET, get_last_socket_error());
BIOerr(BIO_F_BIO_SOCKET, BIO_R_UNABLE_TO_CREATE_SOCKET);
return INVALID_SOCKET;
}
return sock;
}
/*-
* BIO_connect - connect to an address
* @sock: the socket to connect with
* @addr: the address to connect to
* @options: BIO socket options
*
* Connects to the address using the given socket and options.
*
* Options can be a combination of the following:
* - BIO_SOCK_KEEPALIVE: enable regularly sending keep-alive messages.
* - BIO_SOCK_NONBLOCK: Make the socket non-blocking.
* - BIO_SOCK_NODELAY: don't delay small messages.
*
* options holds BIO socket options that can be used
* You should call this for every address returned by BIO_lookup
* until the connection is succesful.
*
* Returns 1 on success or 0 on failure. On failure errno is set
* and an error status is added to the OpenSSL error stack.
*/
int BIO_connect(int sock, const BIO_ADDR *addr, int options)
{
int on = 1;
if (sock == -1) {
BIOerr(BIO_F_BIO_CONNECT, BIO_R_INVALID_SOCKET);
return 0;
}
if (!BIO_socket_nbio(sock, (options & BIO_SOCK_NONBLOCK) != 0))
return 0;
if (options & BIO_SOCK_KEEPALIVE) {
if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)) != 0) {
SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_CONNECT, BIO_R_UNABLE_TO_KEEPALIVE);
return 0;
}
}
if (options & BIO_SOCK_NODELAY) {
if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, &on, sizeof(on)) != 0) {
SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_CONNECT, BIO_R_UNABLE_TO_NODELAY);
return 0;
}
}
if (connect(sock, BIO_ADDR_sockaddr(addr),
BIO_ADDR_sockaddr_size(addr)) == -1) {
if (!BIO_sock_should_retry(-1)) {
SYSerr(SYS_F_CONNECT, get_last_socket_error());
BIOerr(BIO_F_BIO_CONNECT, BIO_R_CONNECT_ERROR);
}
return 0;
}
return 1;
}
/*-
* BIO_listen - Creates a listen socket
* @sock: the socket to listen with
* @addr: local address to bind to
* @options: BIO socket options
*
* Binds to the address using the given socket and options, then
* starts listening for incoming connections.
*
* Options can be a combination of the following:
* - BIO_SOCK_KEEPALIVE: enable regularly sending keep-alive messages.
* - BIO_SOCK_NONBLOCK: Make the socket non-blocking.
* - BIO_SOCK_NODELAY: don't delay small messages.
* - BIO_SOCK_REUSEADDR: Try to reuse the address and port combination
* for a recently closed port.
* - BIO_SOCK_V6_ONLY: When creating an IPv6 socket, make it listen only
* for IPv6 addresses and not IPv4 addresses mapped to IPv6.
*
* It's recommended that you set up both an IPv6 and IPv4 listen socket, and
* then check both for new clients that connect to it. You want to set up
* the socket as non-blocking in that case since else it could hang.
*
* Not all operating systems support IPv4 addresses on an IPv6 socket, and for
* others it's an option. If you pass the BIO_LISTEN_V6_ONLY it will try to
* create the IPv6 sockets to only listen for IPv6 connection.
*
* It could be that the first BIO_listen() call will listen to all the IPv6
* and IPv4 addresses and that then trying to bind to the IPv4 address will
* fail. We can't tell the difference between already listening ourself to
* it and someone else listening to it when failing and errno is EADDRINUSE, so
* it's recommended to not give an error in that case if the first call was
* succesful.
*
* When restarting the program it could be that the port is still in use. If
* you set to BIO_SOCK_REUSEADDR option it will try to reuse the port anyway.
* It's recommended that you use this.
*/
int BIO_listen(int sock, const BIO_ADDR *addr, int options)
{
int on = 1;
int socktype;
socklen_t socktype_len = sizeof(socktype);
if (sock == -1) {
BIOerr(BIO_F_BIO_LISTEN, BIO_R_INVALID_SOCKET);
return 0;
}
if (getsockopt(sock, SOL_SOCKET, SO_TYPE, &socktype, &socktype_len) != 0
|| socktype_len != sizeof(socktype)) {
SYSerr(SYS_F_GETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_LISTEN, BIO_R_GETTING_SOCKTYPE);
return 0;
}
if (!BIO_socket_nbio(sock, (options & BIO_SOCK_NONBLOCK) != 0))
return 0;
# ifndef OPENSSL_SYS_WINDOWS
/* SO_REUSEADDR has different behavior on Windows than on
* other operating systems, don't set it there. */
if (options & BIO_SOCK_REUSEADDR) {
if (setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on)) != 0) {
SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_REUSEADDR);
return 0;
}
}
# endif
if (options & BIO_SOCK_KEEPALIVE) {
if (setsockopt(sock, SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)) != 0) {
SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_KEEPALIVE);
return 0;
}
}
if (options & BIO_SOCK_NODELAY) {
if (setsockopt(sock, IPPROTO_TCP, TCP_NODELAY, &on, sizeof(on)) != 0) {
SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_NODELAY);
return 0;
}
}
# ifdef IPV6_V6ONLY
if ((options & BIO_SOCK_V6_ONLY) && BIO_ADDR_family(addr) == AF_INET6) {
if (setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY, &on, sizeof(on)) != 0) {
SYSerr(SYS_F_SETSOCKOPT, get_last_socket_error());
BIOerr(BIO_F_BIO_LISTEN, BIO_R_LISTEN_V6_ONLY);
return 0;
}
}
# endif
if (bind(sock, BIO_ADDR_sockaddr(addr), BIO_ADDR_sockaddr_size(addr)) != 0) {
SYSerr(SYS_F_BIND, get_last_socket_error());
BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_BIND_SOCKET);
return 0;
}
if (socktype != SOCK_DGRAM && listen(sock, MAX_LISTEN) == -1) {
SYSerr(SYS_F_LISTEN, get_last_socket_error());
BIOerr(BIO_F_BIO_LISTEN, BIO_R_UNABLE_TO_LISTEN_SOCKET);
return 0;
}
return 1;
}
/*-
* BIO_accept_ex - Accept new incoming connections
* @sock: the listening socket
* @addr: the BIO_ADDR to store the peer address in
* @options: BIO socket options, applied on the accepted socket.
*
*/
int BIO_accept_ex(int accept_sock, BIO_ADDR *addr_, int options)
{
socklen_t len;
int accepted_sock;
BIO_ADDR locaddr;
BIO_ADDR *addr = addr_ == NULL ? &locaddr : addr_;
len = sizeof(*addr);
accepted_sock = accept(accept_sock,
BIO_ADDR_sockaddr_noconst(addr), &len);
if (accepted_sock == -1) {
if (!BIO_sock_should_retry(accepted_sock)) {
SYSerr(SYS_F_ACCEPT, get_last_socket_error());
BIOerr(BIO_F_BIO_ACCEPT_EX, BIO_R_ACCEPT_ERROR);
}
return INVALID_SOCKET;
}
if (!BIO_socket_nbio(accepted_sock, (options & BIO_SOCK_NONBLOCK) != 0)) {
closesocket(accepted_sock);
return INVALID_SOCKET;
}
return accepted_sock;
}
/*-
* BIO_closesocket - Close a socket
* @sock: the socket to close
*/
int BIO_closesocket(int sock)
{
if (closesocket(sock) < 0)
return 0;
return 1;
}
#endif