A local copy of OpenSSL from GitHub
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

98 lines
3.5 KiB

/*
* Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the OpenSSL license (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
* in the file LICENSE in the source distribution or at
* https://www.openssl.org/source/license.html
*/
#include <openssl/rc2.h>
#include "rc2_locl.h"
static const unsigned char key_table[256] = {
0xd9, 0x78, 0xf9, 0xc4, 0x19, 0xdd, 0xb5, 0xed, 0x28, 0xe9, 0xfd, 0x79,
0x4a, 0xa0, 0xd8, 0x9d, 0xc6, 0x7e, 0x37, 0x83, 0x2b, 0x76, 0x53, 0x8e,
0x62, 0x4c, 0x64, 0x88, 0x44, 0x8b, 0xfb, 0xa2, 0x17, 0x9a, 0x59, 0xf5,
0x87, 0xb3, 0x4f, 0x13, 0x61, 0x45, 0x6d, 0x8d, 0x09, 0x81, 0x7d, 0x32,
0xbd, 0x8f, 0x40, 0xeb, 0x86, 0xb7, 0x7b, 0x0b, 0xf0, 0x95, 0x21, 0x22,
0x5c, 0x6b, 0x4e, 0x82, 0x54, 0xd6, 0x65, 0x93, 0xce, 0x60, 0xb2, 0x1c,
0x73, 0x56, 0xc0, 0x14, 0xa7, 0x8c, 0xf1, 0xdc, 0x12, 0x75, 0xca, 0x1f,
0x3b, 0xbe, 0xe4, 0xd1, 0x42, 0x3d, 0xd4, 0x30, 0xa3, 0x3c, 0xb6, 0x26,
0x6f, 0xbf, 0x0e, 0xda, 0x46, 0x69, 0x07, 0x57, 0x27, 0xf2, 0x1d, 0x9b,
0xbc, 0x94, 0x43, 0x03, 0xf8, 0x11, 0xc7, 0xf6, 0x90, 0xef, 0x3e, 0xe7,
0x06, 0xc3, 0xd5, 0x2f, 0xc8, 0x66, 0x1e, 0xd7, 0x08, 0xe8, 0xea, 0xde,
0x80, 0x52, 0xee, 0xf7, 0x84, 0xaa, 0x72, 0xac, 0x35, 0x4d, 0x6a, 0x2a,
0x96, 0x1a, 0xd2, 0x71, 0x5a, 0x15, 0x49, 0x74, 0x4b, 0x9f, 0xd0, 0x5e,
0x04, 0x18, 0xa4, 0xec, 0xc2, 0xe0, 0x41, 0x6e, 0x0f, 0x51, 0xcb, 0xcc,
0x24, 0x91, 0xaf, 0x50, 0xa1, 0xf4, 0x70, 0x39, 0x99, 0x7c, 0x3a, 0x85,
0x23, 0xb8, 0xb4, 0x7a, 0xfc, 0x02, 0x36, 0x5b, 0x25, 0x55, 0x97, 0x31,
0x2d, 0x5d, 0xfa, 0x98, 0xe3, 0x8a, 0x92, 0xae, 0x05, 0xdf, 0x29, 0x10,
0x67, 0x6c, 0xba, 0xc9, 0xd3, 0x00, 0xe6, 0xcf, 0xe1, 0x9e, 0xa8, 0x2c,
0x63, 0x16, 0x01, 0x3f, 0x58, 0xe2, 0x89, 0xa9, 0x0d, 0x38, 0x34, 0x1b,
0xab, 0x33, 0xff, 0xb0, 0xbb, 0x48, 0x0c, 0x5f, 0xb9, 0xb1, 0xcd, 0x2e,
0xc5, 0xf3, 0xdb, 0x47, 0xe5, 0xa5, 0x9c, 0x77, 0x0a, 0xa6, 0x20, 0x68,
0xfe, 0x7f, 0xc1, 0xad,
};
#if defined(_MSC_VER) && defined(_ARM_)
# pragma optimize("g",off)
#endif
/*
* It has come to my attention that there are 2 versions of the RC2 key
* schedule. One which is normal, and anther which has a hook to use a
* reduced key length. BSAFE uses the 'retarded' version. What I previously
* shipped is the same as specifying 1024 for the 'bits' parameter. Bsafe
* uses a version where the bits parameter is the same as len*8
*/
void RC2_set_key(RC2_KEY *key, int len, const unsigned char *data, int bits)
{
int i, j;
unsigned char *k;
RC2_INT *ki;
unsigned int c, d;
k = (unsigned char *)&(key->data[0]);
*k = 0; /* for if there is a zero length key */
if (len > 128)
len = 128;
if (bits <= 0)
bits = 1024;
if (bits > 1024)
bits = 1024;
for (i = 0; i < len; i++)
k[i] = data[i];
/* expand table */
d = k[len - 1];
j = 0;
for (i = len; i < 128; i++, j++) {
d = key_table[(k[j] + d) & 0xff];
k[i] = d;
}
/* hmm.... key reduction to 'bits' bits */
j = (bits + 7) >> 3;
i = 128 - j;
c = (0xff >> (-bits & 0x07));
d = key_table[k[i] & c];
k[i] = d;
while (i--) {
d = key_table[k[i + j] ^ d];
k[i] = d;
}
/* copy from bytes into RC2_INT's */
ki = &(key->data[63]);
for (i = 127; i >= 0; i -= 2)
*(ki--) = ((k[i] << 8) | k[i - 1]) & 0xffff;
}
#if defined(_MSC_VER)
# pragma optimize("",on)
#endif