pEpJSONServerAdapter/README.md

719 lines
26 KiB
Markdown
Raw Permalink Normal View History

2017-08-30 10:08:23 +02:00
# p≡p JSON Server Adapter
## Introduction
The p≡p JSON Server Adapter provides a REST-like jQuery-compatible API to
connect with the p≡p engine. It is language-independent and can be used by
any client.
## Requirements
In order to use the p≡p JSON Server Adapter, you need to build and run it.
2017-11-07 17:36:36 +01:00
Currently, Linux (Debian 9, Ubuntu 16.04) and MacOS (10.11, 10.12) are
supported, Windows is about to follow. Newer versions should also work
(file a bug report if not) but are not in our main focus, yet.
## Dependencies
* C++ compiler: tested with g++ 4.8, 4.9, 8.3 and clang++ 2.8. Newer versions should work, too.
2016-03-30 11:39:21 +02:00
* GNU make
* libboost-thread-dev (tested with 1.58, 1.62, 1.67, 1.70 and 1.74)
* libboost-program-options-dev
* libboost-filesystem-dev
2021-02-09 09:12:08 +01:00
* [p≡p Engine](https://gitea.pep.foundation/pEp.foundation/pEpEngine/)
(which needs sequoia, a patched libetpan, libboost-system-dev)
* [libpEpAdapter](https://gitea.pep.foundation/pEp.foundation/libpEpAdapter/)
* [webserver](https://gitea.pep.foundation/fdik/webserver)
* OSSP libuuid
## Building/Installing (Linux and macOS)
### Install the dependencies
Debian 9/10:
~~~~~
apt install -y build-essential libboost-dev libboost-system-dev \
libboost-filesystem-dev libboost-program-options-dev \
libboost-thread-dev libgpgme-dev uuid-dev googletest \
libevent-dev libevhtp-dev
~~~~~
macOS 10.12, 10.13, 10.14:
Use homebrew or macports to install the required libraries.
2018-01-09 12:08:57 +01:00
For more explicit instructions on how to do this with macports, see the
section below.
2017-11-07 17:36:36 +01:00
Build and install the pEp Engine. Instructions can be found here:
2021-02-09 09:12:08 +01:00
[the Engine's Readme](https://gitea.pep.foundation/pEp.foundation/pEpEngineREADME.md)
### Build and install the 'webserver' project
~~~~~
cd ~/code
git clone https://gitea.pep.foundation/fdik/webserver
cd webserver
(edit the Makefile for your $PREFIX etc.)
2017-08-30 10:08:23 +02:00
make
make install
~~~~~
2017-08-30 10:08:23 +02:00
### Build and install the JSON server
~~~~~
2018-03-14 17:13:57 +01:00
cd ~/code/json-ad/server
~~~~~
2017-08-30 10:08:23 +02:00
| :warning: FIXME: The following instructions refer to the old Makefile system that built a dynamically linked binary. This old Makefile was replaced by a hack to create a static binary. Unfortunately the config flexibility of the old Makefile system was removed in this change. |
| ------ |
| There is now also an ad-hoc created `Makefile.Linux`, which also can only be configured directly by editing the file. :-( |
| ------ |
| TODO: Re-create a more flexible build system with a `Makefile` (which is under revision control) and a `local.conf` (which is not, but contains your local-only config settings) |
| ------ |
2017-11-07 17:36:36 +01:00
Edit the build configuration to your needs in `./Makefile.conf`, or create a
`./local.conf` that sets any of the make variables documented in
`./Makefile.conf`.
2017-08-30 10:08:23 +02:00
2017-11-07 17:36:36 +01:00
If a dependency is not found in your system's default include or library
paths, you will have to specify the according paths in a make variable.
Typically, this has to be done at least for the pEp Engine, libetpan and
libevent.
2017-08-30 10:08:23 +02:00
Below are two sample `./local.conf` files, for orientation.
2017-08-30 10:08:23 +02:00
macOS 10.12, 10.13:
2017-08-30 10:08:23 +02:00
~~~~~
PREFIX=$(HOME)/code/json-ad/build
HTML_DIRECTORY=$(PREFIX)/share/pEp/json-adapter/html
GTEST_DIR=$(HOME)/code/gtest/googletest
2017-08-30 10:08:23 +02:00
BOOST_INC=-I$(HOME)/Cellar/boost/1.65.1/include
BOOST_LIB=-L$(HOME)/Cellar/boost/1.65.1/lib
2017-08-30 10:08:23 +02:00
ENGINE_INC=-I$(HOME)/code/engine/build/include
ENGINE_LIB=-L$(HOME)/code/engine/build/lib
2017-08-30 10:08:23 +02:00
ETPAN_INC=-I$(HOME)/code/libetpan/build/include
ETPAN_LIB=-L$(HOME)/code/libetpan/build/lib
2017-08-30 10:08:23 +02:00
GPGME_INC=-I$(HOME)/Cellar/gpgme/1.9.0_1/include
GPGME_LIB=-L$(HOME)/Cellar/gpgme/1.9.0_1/lib
2017-08-30 10:08:23 +02:00
UUID_INC=-I$(HOME)/Cellar/ossp-uuid/1.6.2_2/include
UUID_LIB=-L$(HOME)/Cellar/ossp-uuid/1.6.2_2/lib
~~~~~
2017-08-30 10:08:23 +02:00
Debian 9/10:
2017-08-30 10:08:23 +02:00
~~~~~
PREFIX=$(HOME)/code/json-ad/build
HTML_DIRECTORY=$(PREFIX)/share/pEp/json-adapter/html
GTEST_DIR=/usr/src/googletest/googletest/
2017-08-30 10:08:23 +02:00
ENGINE_INC=-I$(HOME)/code/engine/build/include
ENGINE_LIB=-L$(HOME)/code/engine/build/lib
2017-08-30 10:08:23 +02:00
ETPAN_INC=-I$(HOME)/code/libetpan/build/include
ETPAN_LIB=-L$(HOME)/code/libetpan/build/lib
2017-08-30 10:08:23 +02:00
~~~~~
2017-08-30 10:08:23 +02:00
Now, build and install the server:
2017-08-30 10:08:23 +02:00
~~~~~
make all
2017-08-30 10:08:23 +02:00
make install
~~~~~
2017-08-30 10:08:23 +02:00
If you only want to build the JsonAdapter library, run `make lib` and you'll get
a libjson-adapter.a
With `make test` you can execute the server's tests.
2017-08-30 10:08:23 +02:00
### Macports
[Install MacPorts](https://www.macports.org/install.php) for your version of macOS.
If MacPorts is already installed on your machine, but was installed by a
different user, make sure your `PATH` variable is set as follows in
`~/.profile`:
2017-08-30 10:08:23 +02:00
```
export PATH="/opt/local/bin:/opt/local/sbin:$PATH"
```
Install dependencies packaged with MacPorts as follows.
```
sudo port install gpgme boost ossp-uuid
2017-08-30 10:08:23 +02:00
```
## Building/Installing (Windows)
Clone the repository from https://pep.foundation/dev/repos/pEpJSONServerAdapter and add the
following projects to your MS Visual Studio solution:
pEpJSONServerAdapter\build-windows\pEpJSONServerAdapter\pEpJSONServerAdapter.vcxproj
pEpJSONServerAdapter\build-windows\pEpJSONServerAdapter\pEpJSONServerAdapterLibrary.vcxproj
pEpJSONServerAdapter\build-windows\libevent\libevent.vcxproj
In order to build, the MS VS solution also needs to build the following dependent projects:
- pEpEngine (note that this requires further dependent projects)
- libpEpAdapter
- libevent
The resulting executable is called pEpJSONServerAdapter.exe and will be placed into
the `Debug` or `Release` directory of the solution.
## Running the pEp JSON Adapter
You can use `make run` to start the server.
1. Run `./pEp-mini-json-adapter`. This creates a file that is readable only by the
current user (`~/.pEp/json-token`) and contains the address and
port the JSON adapter is listening on, normally 127.0.0.1:4223 and a
"security-token" that must be given in each function call to authenticate
you as the valid user.
2017-08-30 10:08:23 +02:00
```
./pEp-mini-json-adapter
```
2017-08-30 10:08:23 +02:00
2. Visit that address (normally `http://127.0.0.1:4223/`) in your
JavaScript-enabled web browser to see the "JavaScript test client".
3. Call any function (`version()` or `get_gpg_path()` should work just
fine) with the correct security token.
2016-03-30 11:39:21 +02:00
## Using the p≡p JSON Adapter
2016-03-30 11:39:21 +02:00
In the following section, you'll find background information on how to use
the adapter and its functions.
2016-03-30 11:39:21 +02:00
### Server startup and shutdown
The JSON Server Adapter can be started on demand.
It checks automatically whether an instance for the same user on the machine
2020-07-06 13:04:35 +02:00
is already running and if yes it ends itself gracefully. (TODO!)
If there is no running server found the newly started server creates the
server token file and forks itself into background (if not prevented via
"-d" commandline switch).
2020-07-06 13:04:35 +02:00
### Multi-Client handling
2020-07-06 13:04:35 +02:00
The p≡p JSON server adapter supports multiple clients, communicating with the
server at the same time. Each client instance is identified by a client ID,
that the clients put into each JSON RPC request in the field "clientid".
2020-07-06 13:04:35 +02:00
The client ID is a UUID Version 4, created by the client at startup and has to
be stable while the client application runs. When the client restarts, a new
client ID should be created to avoid interferene with data from the old client
session.
The p≡p JSON server adapter stores data (e.g., a so called "config cache", see
next section) associated with each client ID. After a timeout period with no
JSON RPC calls and no open client connections these data are removed
automatically. Run the mini adapter with -h to see the compiled-in default
timeout value.
### PEP_SESSION handling
When using the p≡p engine, a `PEP_SESSION` is needed as parameter to many API
functions. The p≡p JSON Server Adapter automatically creates one session per
HTTP client connection (and also closes that session automatically when the
2017-10-10 06:59:37 +02:00
client connections is closed). Therefore, the client does not need to take
2020-07-06 13:04:35 +02:00
care of the session management. However, the client should set up a [HTTP
persistent
2020-07-06 13:04:35 +02:00
connection](https://en.wikipedia.org/wiki/HTTP_persistent_connection) to
minify session creation and destruction.
There is a configuration cache, that stores all `config_*()` calls and its
configured values. Whenever a new PEP_SESSION is needed for this client
(identified via its client ID, see previous section), all config values
are applied to this new session, too, before the session is used.
2016-03-30 11:37:24 +02:00
2017-08-30 10:08:23 +02:00
### API Principles
2016-03-30 11:39:21 +02:00
All C data types are mapped the same way, so some day the JSON wrapper can
be generated from the p≡p Engine header files (or the JSON wrapper and the
p≡p engine header are both generated from a common interface description
2017-10-10 06:59:37 +02:00
file).
2016-03-30 11:39:21 +02:00
2017-08-30 10:08:23 +02:00
| C type | JSON mapping |
|--|--|
| `bool` | JSON boolean |
| `int` | JSON decimal number |
| `size_t` | JSON decimal number |
2017-08-30 10:08:23 +02:00
| `char*` (representing a UTF-8-encoded NULL-terminated string | JSON string |
| `char*` (representing a binary string | base64-encoded JSON string |
| `enum` | either JSON decimal number or JSON object containing one decimal number as member |
2017-08-30 10:08:23 +02:00
| `struct` | JSON object |
| linked lists (e.g. `bloblist_t`, `stringlist_t`, `identity_list` etc.) | JSON array of their member data type (without the `next` pointer) |
The parameter type PEP_SESSION is handled automatically by the JSON Server
Adapter and the PEP_SESSION parameter is omitted from the JSON API.
#### enum types
2017-10-10 06:59:37 +02:00
Enum types are represented as JSON objects with one member, whose name is
derived from the enum type name, holding the numeric value of the enum.
Some enum types are still represented directly as JSON decimal number. It
shall be changed in a future version of the JSON Adapter.
#### String types
2017-10-10 06:59:37 +02:00
The JSON Server Adapter does automatic memory management for string
parameters. The current p≡p Engine's API distinguish between `const char*`
parameters and `char*` parameters. `const char*` normally means: the
"ownership" of the string remains at the caller, so the JSON Adapter frees
the string automatically after the call. `char*` normally means: the
"ownership" of the string goes to the Engine, so the JSON Adapter does _not_
free string.
If there are functions that have a different semantics the behavior of the
JSON wrapper has to be changed.
#### Parameter (value) restrictions
2017-10-10 06:59:37 +02:00
Some API functions have restrictions on their parameter values. The JSON
Adapter does not know these restrictions (because it does not know the
semantics of the wrapped functions at all). So it is the client's
responsibility to fulfill these parameter restrictions! Especially when
there are restrictions that are checked with assert() within the p≡p Engine,
it is impossible for the JSON Adapter to catch failed assertions - the
Engine and the Adapter process will be terminated immediatetely when the
Engine is compiled in debug mode (= with enabled assert() checking).
Currently there are no range checks for numerical parameter types (e.g. a
JSON decimal number can hold a bigger value than the `int` parameter type of
a certain C function).
### JSON RPC Requests
The JSON Server Adapter offers its services via HTTP on the address and port
specified on command line. It offers a simple test HTML page on the root
URL.
The JSON RPC functions are POST requests to the path /ja/0.1/callFunction
and the JSON RPC data comes, as usual for POST requests, in the request body and
must be in UTF-8 without any BOM. The `Content-Type` of the request is not relevant.
Here is the body of an example request:
```
{
"id": 1001,
"jsonrpc": "2.0",
"security_token": "YSxxkNga0YUlkmdpUL6_qJuioicGK1wOC5sjGVG",
"method": "import_key",
"params": [
"4oW5PKhgY8XdvIYQiu+KaKnZYyP5UseHD1Sfjb8HpO75m/QT/FxFI………",
4444,
[
"OP"
]
]
}
```
another example:
```
{
"id": 1002,
"jsonrpc": "2.0",
"security_token": "YSxxkNga0YUlkmdpUL6_qJuioicGK1wOC5sjGVG",
"method": "myself",
"params": [
{
"user_id": "alice",
"username": "Alice in pEp land",
"address": "alice@pEp.lol",
"fpr": "4ABE3AAF59AC32CFE4F86500A9411D176FF00E97"
}
]
}
```
Output parameters must be given, but their value is not relevant. The
JavaScript example test client fills the output values with a dummy array,
containing one string element "OP", just to ease debugging.
The result contains the return value and the values of the output parameters,
in reverse order:
Request:
```
{
"id": 1003,
"jsonrpc": "2.0",
"security_token": "YSxxkNga0YUlkmdpUL6_qJuioicGK1wOC5sjGVG",
"method": "get_languagelist",
"params": [
[
"OP"
]
]
}
```
Result:
```
{
"outParams": [
"\"en\",\"English\",\"I want to display the trustwords in English language\"……"
],
"return": {
"status": 0,
"hex": "0 \"PEP_STATUS_OK\""
}
}
```
2017-08-30 10:08:23 +02:00
### API Reference
2016-03-30 11:37:24 +02:00
An complete overview with all functions that are callable from the client
can be found in the [API Reference](pEp JSON Server Adapter/API Reference).
2016-03-30 11:37:24 +02:00
2020-07-06 13:04:35 +02:00
That API reference is a generated file (at irregular intervals) that shows the current API briefly.
There is also a (currently manually written) file that holts a copy of the
documentation from the Engine's header files: [API reference detail.md]
2020-07-06 13:04:35 +02:00
BEWARE: Because this file is not auto-generated, yet, it might be even more outdated!
Most of the callable functions are functions from the C API of the p≡p
Engine. They are described in detail, incl. pre- and post-conditions in
2020-07-06 13:04:35 +02:00
the appropriate C header files of the Engine, which are the authoritative source
of documentation in cases of doubt.
### Authentication
2017-11-01 03:38:31 +01:00
The JSON Server Adapter and the client have to authenticate to each other.
"Authentication" in this case means "run with the same user rights". This is
done by proving that each communication partner is able to read a certain
file that has user-only read permissions.
2017-11-07 17:36:36 +01:00
0. There is a common (between client & server) algorithm to create the path
2018-01-09 12:08:57 +01:00
and filename of the "server token file", for a given user name.
The token file and its directory MUST be owned by the user and MUST be
readable and writable only by the user, nobody else. Client and server
check for the right ownership and access rights of the token file and its
directory. (TODO: What shall be done if that check fails?)
1. The server creates a "server token file" containing a "server token" (a
random-generated string of printable ASCII characters) and the IP address
and port where the server listens on. This file can only be read by
client programs that run with the same user rights.
2018-01-09 12:08:57 +01:00
2. The client checks the path, reads the "server token" from the file and
2017-11-07 17:36:36 +01:00
authenticates itself to the server in each JSON RPC call with that "server
token".
2020-07-06 13:04:35 +02:00
### Callbacks / Event delivery
2020-04-20 18:46:46 +02:00
p≡p applications must register callback handlers at the Engine. At the moment
there are these callbacks:
* `PEP_STATUS messageToSend(message* msg)`
* `PEP_STATUS notifyHandshake(pEp_identity* self, pEp_identity* partner, sync_handshake_signal signal)`
The JSON adapter register its own functions at the Engine which propagate these
events to all connected clients.
2020-07-06 13:04:35 +02:00
The event propagation to the clients are done via long polling: Clients
call the function `pollForEvents()` that blocks until an event
from the Engine arrives. TODO: remove create_session(), use client ID instead?
2020-04-20 18:46:46 +02:00
2020-07-06 13:04:35 +02:00
It is planned to switch to use WebSockets: In fact this is also a type of
"long polling" and an open TCP connection, opened by the Client.
2020-04-20 18:46:46 +02:00
See: https://pep.foundation/jira/browse/JSON-128
## Extending / customizing
If you want to extend or customize the p≡p JSON Adapter, there are several
rules and definitions to take into account.
2016-03-30 11:37:24 +02:00
2020-03-05 17:58:50 +01:00
### API Functions
2017-11-29 23:16:54 +01:00
* The `FunctionMap function` in `ev_server.cc` defines which functions
are callable via the JSON-RPC interface. The existing entries show the
syntax of that map.
Non-static member functions can be called, too. Thanks to `std::function<>`
2017-11-29 23:16:54 +01:00
a member function `Foo::func(Params...)` is handled like a free-standing
function `func(Foo* f, Params...)`.
2016-03-30 11:37:24 +02:00
* For each type there must exist specializations of the template classes
"In" (for input parameters) and "Out" (for output parameters).
The linker will tell you, which specializations are needed.
2016-03-30 11:37:24 +02:00
* The specializations for "generic types" are in `function_map.cc`.
2016-03-30 11:37:24 +02:00
* The specializations for "p≡p-specific types" are in `pep-types.cc`.
2016-03-30 11:37:24 +02:00
2017-08-30 10:08:23 +02:00
#### Parameter directions (In, Out, InOut)
The p≡p JSON Server Adapter supports Input, Output and two ways of "In/Out"
parameters. You have to annotate the direction in the FunctionMap with
2019-11-19 11:39:52 +01:00
`In<>` for input, `Out<>` for output and `InOut<>` or `InOutP<>` for in/out
parameters. These wrapper classes have an optional second template
parameter (parameter type flag) that is explained below.
Return values are always "output" parameters, so they don't have to be
wrapped with `Out<>`, but this wrapper is necessary when you need
non-default wrapper semantics, see below.
Input parameters of fundamental or simple struct types are
usually by-value parameters. Complex structs (or structs that are only
forward-declared in the public API) are usually pointer
parameters. Both ways are supported. You have to specialize `In<T>` or
`In<T*>`, depending how your type is used.
Output parameters of fundamental or simple struct types `T` are usually
declared as a paremeter of type `T*`. The p≡p JSON Server Adapter manages
the memory allocated by the called C function automatically and calls the
appropriate de-allocating function after use.
Calling a function with output parameters requires a dummy value (`null` or
empty string is fine) at the JSON side for each output parameter to keep the
number of parameters at the JSON side the same with the C side.
For In/Out parameters there exist two calling conventions for
call-by-pointer types:
2020-03-05 17:58:50 +01:00
1. caller allocates object and fills with input values, callee can only *change members*.
The C type of the parameter is usually `struct T*`. Use the wrapper `InOut<T*>`
for these parameters.
2. caller allocates object and fills with input values, callee might
2020-03-05 17:58:50 +01:00
change/reallocate the *whole object*. The C type of the parameter is
`struct T**`. Use the wrapper `InOutP<T*>` in these cases.
2020-03-05 17:58:50 +01:00
`InOutP<T>` is also the right wrapper for in/out parameters of fundamental or
enum types due to the additional indirection in the C function call
signature.
2016-03-30 11:37:24 +02:00
2017-02-16 15:41:03 +01:00
#### Parameter type flags
The wrapper classes might be instantiated with special "parameter type
flags". If no flag is given the `DefaultFlag` is used with means the
semantics described already above.
At the moment there exist two parameter type flags which are interpreted as
bitfield, so they can be combined:
2020-03-05 17:58:50 +01:00
* NoInput : This denotes a parameter at the C side that shall *not be exposed*
at the JSON side. So the value cannot be specified by the client, it is
provided by the JSON Server Adapter internally (e.g. for PEP_SESSION)
* DontOwn : Used for pointer types who don't "own" the referred ressource,
so it is not released automatically by the JSON Server Adapter after the
call.
More flags will be added when different semantics will be needed.
2020-03-05 18:01:58 +01:00
#### Automatic parameter value generation
For some parameters or parameter combinations the JSON Server Adapter is
able to generate the values automatically either from the environment or
from other parameters.
These automatic parameter value generators are supported at the moment:
2020-03-05 18:01:58 +01:00
##### In<c_string> and InLength
For functions that have a string parameter of type `const char*` followed by
a `size_t` that specifies the length of the string, the JSON Adapter can
2020-03-05 17:58:50 +01:00
calculate the value of that length parameter automatically, because in the
JSON API the lengths of strings are always known.
Moreover, the "length" that has to be given here means the length of the
2019-11-19 11:39:52 +01:00
string seen by the C API side after processing of all JSON escaping
mechanisms as raw UTF-8 NFC string, so it might be difficult to calculate
that value at client side.
2020-03-05 18:01:58 +01:00
The "magic" is done inside the In<c_string> constructor that stores the string
length in its "Context", and the InLength<> constructore retrieves the value
from its "Context".
Example:
```
// C function declaration:
char* tohex(const char* input, size_t length);
// API definition:
// with implicit length parameter, with dummy JSON parameter
FP( "tohex", new Func<char*, In<c_string>, InLength<>>( &tohex ))
```
To be compatible with previous API versions the `InLength` parameter still
needs a dummy placeholder in the JSON interface, but its value is no longer
relevant:
```
{"jsonrpc":"2.0", "id":28,
"method":"tohex", "params":["some string","dummy_parameter"]
}
```
It is possible to specifiy `InLength<ParamFlag::NoInput>` so no
parameter is exposed to the JSON API anymore:
```
FP( "tohex", new Func<char*, In<c_string>, InLength<ParamFlag::NoInput>>( &tohex ))
```
Now the 2nd parameter is omitted:
```
{"jsonrpc":"2.0", "id":28,
"method":"tohex", "params":["some string"]
}
```
### Embedding in other (desktop) adapters
The JSON Adapter can run as a stand-alone program (called the "mini-adapter") or
as part of another desktop adapter to enhance that adapter with a JSON-RPC interface.
For this the JSON Adapter has to co-operate with the desktop adapter in several ways:
* Startup, configuration and shutdown is managed by the desktop adapter.
* Handshake events and sync messages created by the pEpEngine have to be dispatched
to *all* connected clients, no matter whether they are JSON clients or "native"
clients of the desktop adapter. See "messageToSend" and "notifyHandshake" callbacks.
* The sync thread loop has to be managed by the desktop adapter. The libpEpAdapter
contains an example implementation for that.
* (something else?)
## TODOs
The following issues are planned but not yet implemented.
2016-03-30 11:39:21 +02:00
* More sensible unit tests
2016-03-30 11:39:21 +02:00
2017-08-30 10:08:23 +02:00
* Generate all the tedious boiler plate code
2016-03-30 11:37:24 +02:00
* the content of pep-types.cc
* perhaps the FunctionMap 'function' in mt-server.cc
* perhaps the JavaScript side of the HTML test page to ensure to be
consistent with the server side in pep-types.cc
2016-03-30 11:39:21 +02:00
2017-08-30 10:08:23 +02:00
* Adapt the "p≡p Transport API", when it is final. (either manually or by
code generator, if ready)
2017-11-07 17:36:36 +01:00
2017-11-08 00:39:30 +01:00
## Appendix A: Attack scenarios on the authentication
2017-11-07 17:36:36 +01:00
Let's discuss different attack / threat scenarios. I don't know which are
realistic or possible, yet.
### General ideas / improvements
2018-01-09 12:08:57 +01:00
Currently the JSON Server Adapter writes its server token file in a
directory that is only readable & writable by the user itself.
2018-01-09 12:08:57 +01:00
The server token file is written in $HOME/.pEp/json-token on
UNIX/Linux/MacOS and %LOCALAPPDATA%/pEp/json-token on MS Windows.
The JSON Server Adapter also checks whether .pEp has 0700 access rights
on unixoid systems.
2017-11-08 00:39:30 +01:00
### Attacker with the same user rights
If the attacker is able to run his malicious code with the same user
2018-01-09 12:08:57 +01:00
rights as the JSON Server Adapter and his legitimate client, it is (and
always will be) *impossible* to prevent this attack. Such an attacker also
2017-11-08 00:39:30 +01:00
can just start a legitimate client that is under his control.
The same applies to an attacker who gains root / admin access rights.
### Fake Server with different user rights
```
,----------. ,--------.
| Attacker | <==> | Client |
`----------' `--------'
```
If no real JSON Adapter runs an attacker can create a fake server that
pretends to be a legitimate JSON Adapter. It creates its own server token
file, with different and conspicuous access rights, but a limited
JavaScript client might be unable to detect the file permissions.
This fake server cannot access the private key of the user but it might
get sensitive plaintext data the client wants to encrypt. The fake server
cannot sign the encrypted data so the fake would be conspicuous, too. But
that would be too late, because the sensitive plaintext data could
already be leaked by the fake server.
2018-01-09 12:08:57 +01:00
This attack needs a user's home directory that is writable by someone else
(to create a ~/.pEp/ directory) or a foreign-writable ~/.pEp/ directory.
The pEpEngine creates a ~/.pEp/ directory (if not yet exists) and sets the
permissions to 0700 explicitly.
2017-11-08 00:39:30 +01:00
2017-11-07 17:36:36 +01:00
### Man-in-the-middle with different user rights
```
,---------------------. ,----------. ,--------.
| JSON Server Adapter | <==> | Attacker | <==> | Client |
`---------------------' `----------' `--------'
```
* The attacker cannot read "client token file" nor "server token file".
* The server cannot check "who" connects to it, until the client
authenticates itself, which might be relayed by the attacker from the
original client.
* The attacker has to convince the client that it is a legitimate server. It
has to create a fake "server token file" to divert the client to the
2017-11-08 00:39:30 +01:00
attacker's port. But that fake file cannot contain the right server token
because the attacker does not know it.
2017-11-07 17:36:36 +01:00
* if the server started before the attacker the "server token file"'s
access rights should prevent this (no write access for the attacker, no
"delete" right in common TEMP dir (sticky bit on the directory)
* if the attacker starts before the server it can write a fake toke file.
The server could detect it but is unable to notice the legitimate
client. The client could detect it when it can check the file access
rights.
There might be race conditons...
2017-11-08 00:39:30 +01:00
* Is it possible for the attacker to let the client send the right server
token to him, at least temporarily (e.g. within a race condition)?
* As long as the server runs, the attacker cannot bind to the same address
& port. Finding and binding of the port is done by the server before the
server token file is created and filled.
* When the server that created the "server token file" dies, its port
becomes available for the attacker, but the server token is no longer
valid and no longer useful for the attacker.
* there _might_ be a very _small_ chance for a race condition:
1. The attacker opens a connection to the running server but does not
use it. To find the server it cannot read the server configuration
file, but it can ask the OS for ports that are open in "listen" mode.
Normally the JSON Adapter listens on 4223 or some port numbers above
that. That means: guessing the server's address is quite easy.
2. when the server shuts down, the attacker immediately binds itself to
that port. If a client connects just in this moment it sends the server
token to the attacker, not to the server. But the attacker can use that
token now to the server via the already opened TCP connection.
3. To prevent this the server should call shutdown(2) on its listening
socket to block any new client connection, but still block the port.
(is that the case on all platforms?) Than close(2) all TCP connections
to the clients (if any) and than also delete the server token file.
Finally call close(2) on the listening socket.